摘要
In order to meet the requirements of indoor illumination, a LED daylight lamp model was designed, it can replace traditional fluorescent lamp without insteading additional power supply establishment. The optical properties of the model were simulated using optical analysis software. Its luminous efficiency is about 30.4 lm/W, and the illuminance is about 38 lux when the distance is 1.5 m between the center of the model and measured spot. With the theoretically-optimized design of LED model, experiments based on the results of the optimal simulation in the laboratory were conducted to verify the performance of the proposed LED model, it reaches a power factor of about 0.8 at 6 W. The simulation results are very similar with the measured values. It is testified that simulative method is one of the effective tools for LED lighting optical design.
In order to meet the requirements of indoor illumination, a LED daylight lamp model was designed, it can replace traditional fluorescent lamp without insteading additional power supply establishment. The optical properties of the model were simulated using optical analysis software. Its luminous efficiency is about 30.4 lm/W, and the illuminance is about 38 lux when the distance is 1.5 m between the center of the model and measured spot. With the theoretically-optimized design of LED model, experiments based on the results of the optimal simulation in the laboratory were conducted to verify the performance of the proposed LED model, it reaches a power factor of about 0.8 at 6 W. The simulation results are very similar with the measured values. It is testified that simulative method is one of the effective tools for LED lighting optical design.
基金
Key Scientific and Technological Research Projects of Henan Province(072102240027)
Doctor Foundationof Henan Polytechnic University(648602)
Postgraduate Degree Thesis Innovation Foundation of Henan Polytechnic University(644005)
