期刊文献+

Thermal Stability of Retained Austenite in TRIP Steel After Different Treatments 被引量:5

Thermal Stability of Retained Austenite in TRIP Steel After Different Treatments
原文传递
导出
摘要 Thermal decomposition of retained austenite in TRIP steel was investigated by means of differential scanning calorimetry(DSC).The decomposition curve was abnormal,and the decomposition temperature and the activation energy were measured by the Kissinger method,which were all higher than those in quenched steel.The thermal decomposition data of samples soaked in liquid nitrogen after TRIP treatment were all similar to those without additional low temperature treatment.It indicated that there is a high thermal stability in retained austenite of the TRIP steel at low temperature,which was also proved by XRD analysis. Thermal decomposition of retained austenite in TRIP steel was investigated by means of differential scanning calorimetry(DSC).The decomposition curve was abnormal,and the decomposition temperature and the activation energy were measured by the Kissinger method,which were all higher than those in quenched steel.The thermal decomposition data of samples soaked in liquid nitrogen after TRIP treatment were all similar to those without additional low temperature treatment.It indicated that there is a high thermal stability in retained austenite of the TRIP steel at low temperature,which was also proved by XRD analysis.
出处 《Journal of Iron and Steel Research International》 SCIE EI CAS CSCD 2008年第1期61-64,共4页
基金 Item Sponsored by National Natural Science Foundation of China(50171038) Belgium-China Bilateral Project BIL04/13
关键词 TRIP steel retained austenite thermal stability differential scanning calorimetry TRIP steel retained austenite thermal stability differential scanning calorimetry
  • 相关文献

参考文献7

  • 1P. V. Morra,A. J. B?ttger,E. J. Mittemeijer.Decomposition of Iron-based Martensite. A kinetic analysis by means of differential scanning calorimetry and dilatometry[J].Journal of Thermal Analysis and Calorimetry.2001(3)
  • 2M. J. Genderen,M. Isac,A. B?ttger,E. J. Mittemeijer.Aging and tempering behavior of iron-nickel-carbon and iron-carbon martensite[J].Metallurgical and Materials Transactions A.1997(3)
  • 3Morra P V,B ttger AJ,Mittemeijer E J.Decomposition of Iron-Based Martensite:A Kinetic Analysis by Means of Differ-ent Scanning Calorimetry and Dilatometry[].Journal of Thermoelectricity.2001
  • 4Kissinger Homer E.Reaction Kinetics in Differential Thermal Analysis[].Analytical Biochemistry.1957
  • 5De Cooman BC.Structure-Properties Relationship in TRIP Steels Containing Carbide-Free Bainite[].Current Opinion in Solid State & Materials Science.2004
  • 6Girault E,Jacques P,Harlet Ph,et al.Metallographic Methods for Revealing the Multiphase Microstructure of TRIP-Assisted Steels[].Materials Characterization.1998
  • 7M.J.van Genderen,M.Isac,A.B?ttger,etc.Aging andtempering behavior of iron-nickel-carbon and iron-carbonmartensite[].Metallurgical and Materials Transactions A Physical Metallurgy and Materials Science.1997

同被引文献29

  • 1JIANG Hai-tao1, DING Wei1,2, TANG Di1, HUANG Wei1 (1. National Engineering Research Center for Advanced Rolling Technology, University of Science and Technology Beijing, Beijing 100083, China,2. School of Material and Metallurgy, Inner Mongolia University of Science and Technology, Baotou 014010, Inner Mongolia, China).Mechanical Property and Microstructural Characterization of C-Mn-Al-Si Hot Dip Galvanizing TRIP Steel[J].Journal of Iron and Steel Research International,2012,19(8):29-36. 被引量:7
  • 2景财年,王作成,韩福涛.相变诱发塑性的影响因素研究进展[J].金属热处理,2005,30(2):26-31. 被引量:47
  • 3TIAN Rong,LI Lin,B C De Cooman,WEI Xi-chen,SUN Peng.Effect of Temperature and Strain Rate on Dynamic Properties of Low Silicon TRIP Steel[J].Journal of Iron and Steel Research International,2006,13(3):51-56. 被引量:5
  • 4LI Zhuang,WU Di,HU Rong.Austempering of Hot Rolled Si-Mn TRIP Steels[J].Journal of Iron and Steel Research International,2006,13(5):41-46. 被引量:5
  • 5Chang Gil Lee, Sung-Joon Kim, Tae Ho Lee, et al. Effects of Volume Fraction and Stability of Retained Austenite on Formability in a 0.1C 1.5Si-1.5Mn-0.5Cu TRIP Aided Cold-Rolled Steel Sheet[J]. Materials Science and Engineering, 2004,371 A: 16.
  • 6Krauss G. Martensite in Steel: Strength and Structure[J]. Materials Science and Engineering, 1999,273-275 A: 40.
  • 7DeMEYER M, Vanderschueren D, DeCOOMAN B C. The Influence of the Substitution of Si by Al on the Properties of Cold Rolled C-Mn Si TRIP Steels[J]. ISIJ International, 1999, 39(8): 813.
  • 8Jimenez Melero E, van Dijk N H, Zhao L, et al. Characterization of Individual Retained Austenite Grains and Their Stabili ty in Low Alloyed TRIP Steels[J]. Acta Materialia, 2007,55:6713.
  • 9van Dijk N H, Butt A M, Zhao L, et al. Thermal Stability of Retained Austenite in TRIP Steels Studied by Synchrotron X- Ray Diffraction During Cooling[J]. Acta Materialia,2005,53 : 5439.
  • 10Wang J J, Sybrand Van Der Zwaag. Stabilization Mechanisms of Retained Austenite in Transformation-Induced Plasticity Steel [J].Metallurgical and Materials Transactions,2001,32A (6) :1538.

引证文献5

二级引证文献23

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部