期刊文献+
任意字段
题名或关键词
题名
关键词
文摘
作者
第一作者
机构
刊名
分类号
参考文献
作者简介
基金资助
栏目信息

钒氮微合金化技术在高强度钢中的应用 被引量：3

Application of V-N Microalloying Technology in High Strength Steel
下载PDF
导出
摘要 介绍钒氮微合金化的机理既通过钢中增氮后对钒的析出动力学的影响,优化了钒的析出状态,增加了钒的析出强化和细晶强化效应及其在高强度钢筋、非调质钢、高强度厚壁H型钢和CSP产品等产品开发中的应用。 The mechanism of V-N microalloying is explained. After nitrogen was added in steel, the vanadium precipitation state is optimized by the influence of nitrogen on precipitation dynamics. Effect of Vanadium precipitation and fine grain strengthening are enhanced. The V-N microalloying technique was widely used in the development of products such as high strength rebar, non-regulating steel, high strength thick wall H shape steel, CSP product and so on.
作者 康卓 马党参 刘建华 陈再枝 司云森
机构地区 昆明理工大学材料与冶金工程学院 钢铁研究总院结构材料研究所 钢铁研究总院结构材料研究所
出处 《天津冶金》 CAS 2008年第3期34-36,共3页 Tianjin Metallurgy
关键词 钒氮微合金化 晶粒细化 沉淀强化 应用 V-N microalloying, grain refinement, precipitation strengthening, application
分类号 TF704.2 [冶金工程—钢铁冶金]
  • 相关文献

参考文献9

  • 1M.korchnsky,马智明,宋红煜,杨华.微合金钢在性能和经济方面的协调[J].河南冶金,2001,9(5):19-22. 被引量：10
  • 2陈博时.钒和氮微合金化的高强低碳锰钢[J].上海钢研,1999(2):58-60. 被引量：3
  • 3杨才福,张永权.钒氮微合金化技术在HSLA钢中的应用[J].钢铁,2002,37(11):42-47. 被引量：82
  • 4R.Lagneborg, T.Siwecki, S.Zajac,et al..The Role of Vanadium in Microalloyed Steels.Scandinavian Journal of Metallurgy, 1999,28 (5) : 186-241.
  • 5Russwiurm.D,Wille.P.High Strength Weldable Reinforcing Bars. Microalloying' 95, Pittsburgh, PA, ISS, 1995,377.
  • 6王权礼 杨雄 等.低成本V-N微合金化HRB400热轧钢筋的生产试制和综合性能.钒氮微合金化钢的开发和应用,2002,(8):25-35.
  • 7杨才福,张永权.氮在非调质钢中的作用[J].钢铁钒钛,2000,21(3):16-22. 被引量：31
  • 8Lubensky.P.L,W igman.S.L,Johnson.D.J.High Strength Steel Processing via Direct Charging Using Thin Slab Technology.M icroalloying' 95, Pittsburgh, PA ISS, 1995,225-233.
  • 9Kimura.T.Heavy Gauge H-shapes With Excellent Seismic Resistance for Building Structures Produced by the Third Generation TMCP. International Symposium on Steel for Fabricated Structures Conference Proceedings, ASM Internationa 1 .Materials Park, OH , USA. 1999,11 : 1 - 4.

二级参考文献26

  • 1[1] Korchynsky M and Paules J R.Microalloyed Forging Steels - A State of the Art Review[A].SAE Technical Paper Series，＃890801,SAE Int.Congress and Exposition[C].Detroit Michigan:SAE Publications Division,1989.1-3.
  • 2[2] Engineer S and Huchtemann B.Review and Development of Microalloyed Steels for Forgings,Bars and Wires[A].Symposium Proceedings on Fundamentals and Applications of Microalloying Forging Steels[C].Golden,Co.,1996.61-78.
  • 3[3] Osuzu H,etal.Application of Microalloyed Steels to Achieve High Toughness in Hot Forged Components without Further Heat Treatments[A].SAE Technical Paper Series,＃860131,SAE Int.Congress and Exposition[C].Detroit Michigan:SAE Publications Division,1986.1-4.
  • 4[4] Glodowski R J,Korchynsky M and Banerji S K. Physical Metallurgy Applications and Enhanced Machinability of Microalloyed V-Ti-N Forging Steels[A].SAE Technical Paper Series,＃980884,SAE Int.Congress and Exposition[C].Detroit Michigan:SAE Publications Division,1998.1-4.
  • 5[5] Ravenshorst H. Machinability of Microalloyed Steels (The Second Generation of Precipitation Hardened Steels)[A].Microalloying'95[C].Pittsburgh:ISS,1995.439-446.
  • 6[6] National Standard GBT 15712—1995.Ferritic-Pearlitic Engineering Steels for Precipitation Hardening from Hot-Working Temperature[S].
  • 7[7] Zajac S,Siwecki T and Korchynsky M. Importance of Nitrogen for Precipitation Phenomena in V-Microalloyed Steels[A].Conf.Proc.On Low Carbon Steels for the 90's[C].Pittsburgh:ASMTSM,1993.139-150.
  • 8[8] Zajac S,Lagneborg R and Siwecki T. The Role of Nitrogen in Microalloyed Steels[A].Microalloying'95[C].Pittsburgh:ISS,1995.321-340.
  • 9[9] Korchynsky M and Glodowski R.The Role of Nitrogen in Microalloyed Forging Steel[A].ⅡInternational Conference of ForgingBrazil[C].Proto Alegre-RS:US Vanadium Corporation,1998.2-11.
  • 10[10] Korchynsky M. Overview[A].Proc.8thProcess Tech.Conf.[C].Warrendale:ISS,1988.79-87.

共引文献115

同被引文献223

引证文献3

二级引证文献19

天津冶金
2008年 第3期

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部