期刊文献+

人工模拟菌类条件对BOPET/AI/LDPE复合薄膜拉伸性能的影响

Effect of Artificial Fungi on Tension Property of BOPET/AL/LDPE Composite Film
下载PDF
导出
摘要 研究了人工模拟菌类条件下BOPET/Al/LDPE复合薄膜拉伸性能的变化情况;分析了不同的菌类处理时间和加载速率下,复合薄膜拉伸强度和伸长率的变化规律。 The changes of tension property of BOPET/AL/LDPE composite film under artificial fungi condition were studied, and the change rules of the tension strength and elongating rate of the composite film under the differential loading rate and treating time of artificial fungi were measured and analyzed.
出处 《塑料工业》 CAS CSCD 北大核心 2008年第B06期153-154,共2页 China Plastics Industry
基金 国家自然科学基金项目(30271050)
关键词 BOPET/Al/LDPE 复合薄膜 加载速率 拉伸性能 BOPET/Al/LDPE Composite Film Loading Rate Tension Strength
  • 相关文献

参考文献2

二级参考文献23

  • 1魏悦广.薄膜非线性撕裂三种弯曲模型的解答及讨论[J].力学学报,2003,35(6):677-689. 被引量:3
  • 2佟富强,刘宝璋,尹勃.聚乙烯包装薄膜形变性能与微观结构的研究[J].包装工程,1994,15(3):108-110. 被引量:8
  • 3刘进华,李大纲,张立芳.加载速率对低密度聚乙烯薄膜拉伸性能的影响[J].包装工程,2005,26(5):91-92. 被引量:13
  • 4Spies GJ. The peeling test on redux-bonded joints. J Aircraft Eng, 1953, 25:64~70
  • 5Feliu-Baez R, Lockhart HE, Burgess G. Correlation of peel and burst tests for pouches. Packaging Tech Sci, 2001, 14:63~69
  • 6Choi JW, Oh TS. Peel strength and peel angle measured by the T-peel test on Cr/BPDA-PDA interface. J Adhe Sci Tech, 2001, 15:139~152
  • 7Asai H, Iwase N, Suga T. Influence of ceramic surface treatment on peel-off strength between aluminum nitride and epoxy-modified polyaminobismaleimide adhesive. IEEE Trans on Adv Packaging, 2001, 24:104~112
  • 8Bundy K, Schlegel U, Rahn B, et al. Improved peel test method for measurement of adhesion to biomaterials. J Mater Sci: Mater in Medicine, 2000, 11:517~521
  • 9Kawabe M, Tasaka S, Inagaki N. Effects of surface modification by oxygen plasma on peel adhesion of pressuresensitive adhesive tapes. J Appl Polym Sci, 2000, 78:1392~1401
  • 10Kim KS, Aravas N. Elasto-plastic analysis of the peel test.Int J Solids Struct, 1988, 24:417~435

共引文献2

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部