期刊文献+
任意字段
题名或关键词
题名
关键词
文摘
作者
第一作者
机构
刊名
分类号
参考文献
作者简介
基金资助
栏目信息

钢丝拉拔过程中的残余应力 被引量：10

Residual Stress of Steel Wire during Drawing
下载PDF
导出
摘要 介绍钢丝拉拔过程中残余应力的研究现状及影响残余应力的各种因素。通过研究存在的各类问题,对残余应力影响因素进行了讨论,指出有限元技术、数值模拟与实验的对比性研究成为测量残余应力的有效方法,对今后的研究方向提出建议。 To introduce the present research situation of residual stress of steel wire during drawing and every factors affecting residual stress. The factors affecting residual stress are discussed by researching the existing problems. It is pointed out that the comparison research between finite element technology, numerical simulation and experiment becomes effective method for the measurement of residual stress, suggestions for research orientation aftertime are put forward.
作者 徐萍 王伯健
机构地区 西安建筑科技大学
出处 《金属制品》 2008年第3期1-4,共4页 Metal Products
关键词 钢丝 拉拔 残余应力 应力测量 steel wire drawing residual stress measurement of stress
分类号 TG356.46 [金属学及工艺—金属压力加工]
  • 相关文献

参考文献11

  • 1D. C. Ko, S. K. Lee, W. H. Hwangb, et al. The evaluation of residual stress on the drawn wire using nano-indentation test[ J]. Journal of Materials Processing Technology, 2007 ( 191 ) : 64 - 67.
  • 2M. L. Martinez-Perez, F. J. Mompean, J. Ruiz - Hervias, et al. Residual stress profiling in the ferrite and cementite phases of cold-drawn steel rods by synchrotron X-ray and neutron diffraction [ J ]. Acta Materialia, 2004 ( 52 ) : 5303 -5313.
  • 3K. VAN ACKER, J. ROOT,P. VAN HOUTTE, et al. Neutron diffraction measurement of the residual stress in the cementite and ferrite phases of cold-drawn steel wires [ J]. Pergam, 1996:4039 -4049.
  • 4杨帆,蒋建清,方峰,王燕.高强度钢丝残余应力的研究进展[J].材料导报,2007,21(10):74-78. 被引量：2
  • 5F. Yang, J. Q. Jiang, F. Fang, et al. Rapid determination of residual stress profiles in ferrite phase of cold-drawn wire by XRD and layer removal technique [ J ]. Materials Science and Engineering,2007 : 1 - 6.
  • 6J. M. Atienza, M. L. Martinez - Perez, J. Ruiz - Hervias, et al. Residual stresses in cold drawn ferritic rods [ J ]. Scripta Materialia 2005 ( 52 ) : 305 - 309.
  • 7S. He, A. Van Bael, S. Y. Li,et al. Residual stress determination in cold drawn steel wire by FEM simulation and X -ray diffraction [ J ]. Materials Science and Engineering. A2003 (346) : 101 - 107.
  • 8Henrik Oversta. The influence of bearing geometry on the residual stress state in cold drawn wire, analysed by the FEM [ J ]. Journal of Materials Processing Technology, 2006( 171 ) :446 -450.
  • 9刘智,杨林,车磊,马宁.塑性变形T8碳素钢中渗碳体相的残余应力[J].机械工程材料,2007,31(1):12-15. 被引量：4
  • 10Motoo Asakawa,Wataru Sasaki,Shunsuke Shishido,孙刘歌.拉丝模参数对棒材拉拔后残余应力的影响[J].金属制品,2004,30(B05):44-47. 被引量：5

二级参考文献48

  • 1Sakamaki K,Inada S.Brittle fracture of lamellar pearlite steel containing proeutectoid cementite[J].J Soc Mat Sci Japan,1980,29:381-386.
  • 2Sakarnaki K,Inada S,Hori S.Tensile fracture of spheroidized0.7% carbon steel at low temperatures[J].J Soc Mat Sci Japan,1981,30:1109-1115.
  • 3Nishida T,Mutoh Y,Tsujii N.Effect of size and volume fraction of cardide particles on strength and fractur toughness of P/M high speed steel[J].J Soc Mat Sci Japan,1992,41:1403-1409.
  • 4Winholtlz R A,Cohen J B.Load sharing of the phases in 1080steel during low-cycle fatigue[J].Metallurgical Transactions A,1992,23A:341-354.
  • 5Harabusa T,Fujiwara H,Nishida M.Residual microstress development in steels after tensile deformation[C]//Intemational Conf on Residual Stresses 2.New York:Elsevier Applied Science,1989:555-560.
  • 6Hanabusa T,Fujiwara H,Uga K,et al.Development of residual stress in deformed steel containing carbide particles[J].Residual Stress in Science and Technology,1987 (1):547 -554.
  • 7Hanabusa T,Fukura J,Fujiwara H.X-ray residual stress measurement of cementite in steel materia[J].J S M E,1969,35:237-244.
  • 8Belassel M,Lebrun J L,Denis S,et al.Effect of thermal and mechanical loading on the generation of macro and micro stresses in futectoid steel[C]//Intemational Conf on Residual Stresses 4.Bethel:[s.n.],1994:392-401.
  • 9Winholtz R A,Cohen J B.Separation of the macro and microstresses in plastically deformed 1080 steel[C]//Adv X-ray Anal.Denver:[s.n.],1989:341-353.
  • 10Winholtz R A,Cohen J B,Changes in the macrostresses and microstresses in steel with fatifue[J].Mater Sci Eng,1992,154A:155-163.

共引文献10

同被引文献61

引证文献10

二级引证文献20

金属制品
2008年 第3期

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部