期刊文献+

磨矿过程中的破碎统计力学分析 被引量:4

Crushing Statistic Mechanics Analysis in Grinding Process
下载PDF
导出
摘要 矿石的破碎,不仅其破坏强度具有统计现象,而且其破坏后的产品粒度也具有统计规律。在磨碎过程中,矿粒破碎发生的概率事件取决于钢球碰到矿粒的概率及钢球与矿粒碰撞后发生破碎的概率。仿照统计力学研究的科学方法,推导了单一球径球组和混合球径球组破碎的统计力学公式,其最大破碎事件量所对应的球径或配比可作为最佳球径或最佳配比的依据。 Not only the crushing strength but also the product size distribution appears the statistic phenomena in ore grinding process of mineral processing. Whether the ores are crushed or not in grinding depends upon the bumping probability and the crushing probability. According to statistic mechanics research scheme, the crushing statistic mechanics formulae are calculated for mono-size ball size and mixed ball size, respectively. Therefore, the maximum crushing probability distribution can be used as the basis for determining optimum ball diameter or load ball system.
出处 《有色金属》 CSCD 北大核心 2008年第3期102-104,共3页 Nonferrous Metals
基金 江西省自然科学基金资助项目(0550014) 华东交通大学科研基金资助项目(01304112)
关键词 选矿工程 磨矿 统计力学 破碎概率 碰撞概率 mineral processing grinding statistic mechanics bumping probability crushing probability
  • 相关文献

参考文献5

二级参考文献9

  • 1段希祥,A选厂碎磨技术改造试验室试验报告,1993年
  • 2段希祥,中国科学.A,1989年,8期,856页
  • 3刀正超,选矿厂磨矿工,1987年,151页
  • 4李启衡,碎矿与磨矿,1980年,185页
  • 5崔巍,球磨机的合理平衡装球,1959年,50页
  • 6塔加尔特 A F,选矿手册(湿式磨碎).2.第2分册(译),1959年
  • 7段希祥,试验室阶段报告,1996年
  • 8段希祥.矿石细磨过程的钢球尺寸研究[J]云南冶金,1986(05).
  • 9段希祥.粒度及其相互换算[J]有色金属(选矿部分),1985(05).

共引文献74

同被引文献119

  • 1杜木伟,刘晨敏,刘锡霞.我国建筑垃圾处理设备现状及发展趋势[J].工程机械文摘,2013(1):77-80. 被引量:5
  • 2赵三银,李伟升,林永权,赵旭光,余其俊.转炉钢渣粉磨动力学的实验研究[J].水泥工程,2006(2):5-8. 被引量:12
  • 3赵三银,赵旭光,余其俊.RRB分布模型特征粒径和均匀性系数的准确计算[J].水泥,2006(5):1-3. 被引量:15
  • 4刘明.中国水泥工业发展与节能降耗和减排政策措施[J].中国水泥,2007(4):7-9. 被引量:2
  • 5中国铅锌锡锑编辑部.中国铅锌锡锑.2008,(8):26-27.
  • 6ATMACA A, MEHMET K. Educing energy consumption of a raw mill in cement industry[J]. Energy, 2012, 42 ( 1 ) : 261-269.
  • 7ABDELLAOUI M, GAFFET E. The physics of mechanical alloying in a planetary ball mill Mathematical treatment[J]. Acta Metallurgica et Materialia, 1995, 43 (3): 1087-1098.
  • 8BERTHIAUX H, VARINOT C, DODDS J. Approximate calculation of breakage parameters from batch grinding tests [J]. Chemical Engineering Science, 1996, 51 (19) : 4509-4516.
  • 9MENACHO J M. Some solutions for the kinetics of combined fracture and abrasion breakage[J]. Powder Technology, 1986, 49 ( 1 ) : 87-95.
  • 10Naoya Kotake,Mitsuyuki Kuboki,Shinichi Kiya,et al.Influence of dry and wet grinding conditions on fineness and shape of particle size distribution of product in a ball mill[J].Advanced Powder Technology,2011,22(1):86-92.

引证文献4

二级引证文献25

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部