产Nisin突变株发酵条件的优化

Optimization of the fermentation conditions of mutant WY-4 which produces Nisin

研究了产Nisin突变株WY-4的发酵条件,最适接种量为5%,最适发酵温度为30℃,最适起始pH值为6.75,采用流加浓度为1mol/L的NaOH溶液来控制发酵过程中发酵液pH值不低6,在此条件下,Nisin的浓度达到718.98 IU/mL,比对照提高了29.14%。

The fermentation conditions of the mutant WY-4 which produces Nisin were optimized as follows： inoculating quantity （5%）, temperature （30℃）, and the original pH （6.75）, pH of the ferment liquid being controlled at pH6 by adding 1mol/L NaOH continuously during the fermentation, Under these conditions, Nisin activity increased remarkably, and its concentration reached 718.98IU/mL, 29.14% higher than that of control.