摘要
巨型观音铜像采用熔模石膏型与蜡模湿砂型分铸,然后拼焊成型。实践证明:该法铸造成本较低、操作简单,且铸件壁厚均匀、变形量小、铸造缺陷较少。
Grand guanyin copper figure was cast firstly in plaster mold with investment pattern and in green sand mold with wax pattern respectively, and then individual cast parts were mounted together by welding. It is practically verified that this method exhibited less expense, easy operation, cast wall with uniform thickness, deformation decrease and cast defects reduction.
出处
《特种铸造及有色合金》
CAS
CSCD
北大核心
1997年第6期44-46,共3页
Special Casting & Nonferrous Alloys
关键词
熔模石膏型铸造
蜡模湿砂型铸造
复分铸
铜像
Investment Pattern in Plaster Mold, Wax Pattern in Green Sand Mold, Separated Casting