摘要
采用水热法在玻璃基板上制备了TiO2微米花,研究了反应物TiCl3的起始浓度、反应温度和反应时间对生成产物的形貌与晶型影响,并对产物进行SEM和XRD表征。结果表明:生成的TiO2晶体为金红石型,TiO2微米花的直径约2μm,它由TiO2纳米棒自组装而成,TiO2纳米棒呈现长方体形,棒径约50nm,棒长大约1μm。
The TiO2 microflowers were prepared on the glass substrates via hydrothermal method, The effects of the concentration of TiCl3, the reaction temperature and the reaction time on the morphology and crystal form of products were studied, the as-prepared TiO2 was characterized by both SEM and XRD. Results show that the products are rutile TiO2, the as-prepared TiO2 microflowers which diameter is about 2 um are assembled from TiO2 nanorods, The TiO2 nanorods appear in the cuboid and its diameter is about 50 nm and the length is about 1 um.
出处
《电子元件与材料》
CAS
CSCD
北大核心
2008年第7期27-29,共3页
Electronic Components And Materials
基金
国家“973”计划资助项目(No.2003CB716902)
国家“863”计划资助项目(No.2003AA302780)
关键词
无机非金属材料
TIO2
合成
微米花
纳米棒
水热法
non-metallic inorganic material
TiO2
synthesis
microflowers
nanorod
hydrothermal method