摘要
以丁腈橡胶为基质、铌镁锆钛酸铅粉体为分散相,制备了压电陶瓷/丁腈橡胶复合材料,研究了极化条件和成型压力对复合材料介电性能和压电性能的影响。结果发现,复合材料的介电常数随极化电场强度、极化温度和成型压力的增加而增加;压电常数随极化电场强度和成型压力的增加而增加,而在极化温度为80℃时出现最大值。
Piezoelectric composites were prepared by using acrylonitrile-butadiene rubber as the matrix and lead magnesite niobate zircomate titanate piezoelectric ceramics powder as the disperse phase, and the change of dielectric and piezoelectric properties of the composites under different polarizing conditions and moulding pressure were studied. The results showed that the dielectric constant increased with the increase of polarizing electric-field intensity, polarizing temperature and moulding pressure, and the piezoelectric constant increased with the in- crease of polarizing electric-field intensity and moulding pressure, however, the piezoelectric constant has a maximum value at 80℃.
出处
《合成橡胶工业》
CAS
CSCD
北大核心
2008年第1期62-65,共4页
China Synthetic Rubber Industry
基金
国家自然科学基金资助项目(50173004)
国家“八六三”计划资助项目(2003AA324030)
北京市科技新星计划资助项目(2003A11)
中国节能投资公司资助项目(50503002)
关键词
丁腈橡胶
铌镁锆钛酸铅
压电复合材料
压电性能
介电性能
成型压力
acrylonitrile-butadiene rubber
lead magnesite niobate zircolnate titanate piezoelectric ceramics
piezoelectric composite
dielectric property
piezoelectric property
moulding pressure
