期刊文献+

RVA and Farinograph Properties Study on Blends of Resistant Starch and Wheat Flour 被引量:17

RVA and Farinograph Properties Study on Blends of Resistant Starch and Wheat Flour
下载PDF
导出
摘要 Resistant starch (RS) is the undigested starch that passes through the small intestine to the large intestine. As a functional low calorie additive, it has special applications in the food industry. Rapid visco analysis (RVA) and the Brabender farinograph were used to study the pasting properties and the viscoelasticity of blends of RS (RS3 and RS2) and three wheat flours. The wheat flours represented strong gluten wheat (SGW), intermediate gluten wheat (IGW), and weak gluten wheat (WGW) flours, at different levels of RS substitution (0, 5, 10, 15, and 20%). The influence of RS3 on the control wheat flours and RS-wheat flour blends were consistent with those of RS2. The peak, trough, and final viscosities of RS3-wheat flour blends were higher than those of the corresponding RS2-wheat flour blends. The peak, trough, breakdown, final, and setback viscosities ofwheat-RS blends decreased with an increase in resistant starch contents from 0 to 20% in the blends. The 0-20% RS-wheat flour blends were all able to form doughs. The dough development times, dough stabilities, dough breakdown times, and farinograph quality numbers for the RS-wheat flour blends decreased as the RS proportion in the blends increased. The values for RS-SGW flour blends were the highest, followed by RS-IGW and then RS-WGW flour blends. The water absorption values for RS-wheat flour blends and the mixing tolerance index for RS-WGW flour blends were found to increase significantly with an increasing proportion of RS from 0 to 20%, but the mixing tolerance index for RS-SGW and RS-IGW flour blends showed no significant differences amongst the different ratios. Correlation analysis showed that the Farinograph quality number was highly positively correlated with dough breakdown time, dough stability, and dough development time (r= 1.000, 0.958, 0.894), and highly negatively correlated with the mixing tolerance index (r =-0.890). Data from this study can be used for the development of dough-based products. It also provides a basis for RS-wheat flour blends and quality evaluation in the food industry. Resistant starch (RS) is the undigested starch that passes through the small intestine to the large intestine. As a functional low calorie additive, it has special applications in the food industry. Rapid visco analysis (RVA) and the Brabender farinograph were used to study the pasting properties and the viscoelasticity of blends of RS (RS3 and RS2) and three wheat flours. The wheat flours represented strong gluten wheat (SGW), intermediate gluten wheat (IGW), and weak gluten wheat (WGW) flours, at different levels of RS substitution (0, 5, 10, 15, and 20%). The influence of RS3 on the control wheat flours and RS-wheat flour blends were consistent with those of RS2. The peak, trough, and final viscosities of RS3-wheat flour blends were higher than those of the corresponding RS2-wheat flour blends. The peak, trough, breakdown, final, and setback viscosities ofwheat-RS blends decreased with an increase in resistant starch contents from 0 to 20% in the blends. The 0-20% RS-wheat flour blends were all able to form doughs. The dough development times, dough stabilities, dough breakdown times, and farinograph quality numbers for the RS-wheat flour blends decreased as the RS proportion in the blends increased. The values for RS-SGW flour blends were the highest, followed by RS-IGW and then RS-WGW flour blends. The water absorption values for RS-wheat flour blends and the mixing tolerance index for RS-WGW flour blends were found to increase significantly with an increasing proportion of RS from 0 to 20%, but the mixing tolerance index for RS-SGW and RS-IGW flour blends showed no significant differences amongst the different ratios. Correlation analysis showed that the Farinograph quality number was highly positively correlated with dough breakdown time, dough stability, and dough development time (r= 1.000, 0.958, 0.894), and highly negatively correlated with the mixing tolerance index (r =-0.890). Data from this study can be used for the development of dough-based products. It also provides a basis for RS-wheat flour blends and quality evaluation in the food industry.
出处 《Agricultural Sciences in China》 CAS CSCD 2008年第7期812-822,共11页 中国农业科学(英文版)
基金 the National Natural Science Foundation of China (30671270) the National High Technology R & D Program of China (2006AA100101).
关键词 resistant starch wheat flour pasting properties rapid viscosity analysis dough stability farinograph quality number resistant starch, wheat flour, pasting properties, rapid viscosity analysis, dough stability, farinograph quality number
  • 相关文献

参考文献18

二级参考文献56

  • 1赵凯,张守文,方桂珍.抗性淀粉的生理功能及在食品工业中的应用[J].哈尔滨商业大学学报(自然科学版),2002,18(6):661-663. 被引量:15
  • 2宋建民,刘爱峰,尤明山,李保云,吴祥云,赵振东,刘广田.糯小麦配粉对淀粉糊化特性和面条品质的影响[J].中国农业科学,2004,37(12):1838-1842. 被引量:54
  • 3张春庆,李晴祺.影响普通小麦加工馒头质量的主要品质性状的研究[J].中国农业科学,1993,26(2):39-46. 被引量:130
  • 4魏益民.谷物品质与食品品质[M].西安:陕西人民出版社,2002..
  • 5Nakamura T, Yamamori M, Hirano H, et al. Production of Waxy(amylose-free) Wheat[J]. Molgen Genet, 1995,248:252~259.
  • 6王涛.糯性春小麦选育进展[A]..21世纪小麦遗传育种展望--小麦遗传育种国际学术讨论会文集[C].北京:中国农业科技出版社,2001.537-539.
  • 7Graybosch R A. Waxy wheats: Origin, properties, and prospects. Trends in Food Science and Technology, 1998, 10(8):135-142.
  • 8Lee Y T, Schwarz P B,D'Appolonia B L. Functional properties of beta-glucans from hull-lee barley on wheat starch and flour. Food Science Biotechnology, 1998, 7:51-55.
  • 9De Stefanis V A, Ponte J G, Chung F H, Ruzza N A. Binding of crumb softeners and dough strengtheners during breadmaking. Cereal Chemistry, 1977, 54:13-24.
  • 10Morita N, Fujita S, Domon E, Ando H, Mitsunaga T. Effect of substitution of waxy-barley flour on viscoelastic properties of wheat dough and bread making. Journal of Applied Glycoscience, 1998,45:385-391.

共引文献144

同被引文献209

引证文献17

二级引证文献158

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部