摘要
讨论了主盐、甲基磺酸用量,电流密度,温度,搅拌速率等工艺参数对甲基磺酸盐电镀锡铅合金的影响。结果表明,增大电流密度会改变镀层中合金比例;加大搅拌速率会使铅更容易沉积;镀液温度不会引起合金比例的较大变化,但升温会使沉积加快。在最佳工艺条件下,所得锡铅合金的锡含量及镀层厚度较稳定。?
The effects of technological parameters, such as the dosages of main salts and methanesulfonic acid, current density, temperature and stirring rate on the electroplating of Sn-Pb alloy in a methanesulfonate electrolyte were discussed The results showed that the increase of current density changes the alloy proportion of deposit. A high stirring rate facilitates the deposition of Pb. The bath temperature does not cause a large variation of alloy proportion, but the deposition rate is increased with increasing temperature. The Sn content and thickness of Sn-Pb alloy coating are stable under optimized process conditions.
出处
《电镀与涂饰》
CAS
CSCD
2008年第7期7-9,共3页
Electroplating & Finishing
关键词
锡铅合金
电镀
甲基磺酸盐
工艺参数
tin-lead alloy
electroplating
methanesulfonate
process parameter