期刊文献+

Effects of vibration and grain refiner on microstructure of semisolid slurry of hypoeutectic Al-Si alloy 被引量:8

Effects of vibration and grain refiner on microstructure of semisolid slurry of hypoeutectic Al-Si alloy
下载PDF
导出
摘要 The effects of vibration and grain refiner on the microstructure of semisolid slurry of hypoeutectic Al-Si alloy were studied. The impact of vibration on the convection of liquid was conducted by using a system of water-particle tracer. The 356 melt at temperature of 630-660 ℃ with or without grain refiner Al-5%Ti-1%B was poured into a metal cup as the vibrating vessel, then it was cooled to 590-610 ℃ in the semisolid zone and kept for some time, subsequently vibration with different frequencies was applied. The results show that the primary α(Al) particles become finer and rounder with the increase of vibration frequency. The slurry with primary α(Al) equivalent particle diameter(EPD) of about 90 μm and average shape coefficient(ASC) of about 0.5 can be prepared under vibration of 20 Hz. With the combined action of vibration and grain refiner Al-5Ti-B, even smaller and rounder spheroids with EPD of about 85 μm and ASC of about 0.6 are obtained. The effects of vibration and grain refiner on the microstructure of semisolid slurry of hypoeutectic Al-Si alloy were studied. The impact of vibration on the convection of liquid was conducted by using a system of water-particle tracer. The 356 melt at temperature of 630-660 ℃ with or without grain refiner Al-5%Ti-1%B was poured into a metal cup as the vibrating vessel, then it was cooled to 590-610 ℃ in the semisolid zone and kept for some time, subsequently vibration with different frequencies was applied. The results show that the primary a(Al) particles become finer and rounder with the increase of vibration frequency. The slurry with primary a(Al) equivalent particle diameter(EPD) of about 90μm and average shape coefficient(ASC) of about 0.5 can be prepared under vibration of 20 Hz. With the combined action of vibration and grain refiner Al-5Ti-B, even smaller and rounder spheroids with EPD of about 85μm and ASC of about 0.6 are obtained.
出处 《中国有色金属学会会刊:英文版》 EI CSCD 2008年第4期842-846,共5页 Transactions of Nonferrous Metals Society of China
基金 Project(50775086) supported by the National Natural Science Foundation of China Project (2007AA03Z557) supported by the Hi-tech Research and Development Program of China
关键词 亚共晶铝硅合金 机械振动 半固态金属 晶粒细化剂 微观结构 mechanical vibration hypoeutectic Al-Si alloy semisolid metal grain refiner
  • 相关文献

参考文献3

二级参考文献24

  • 1ESKIN D G,KATGERMAN S L.Mechanical properties in the semi-solid state and hot tearing of aluminum alloys[J].Progress in Materials Science,2004(49):629-711.
  • 2ATKINSON H V,KAPRANOS P,KIRKWOOD D H.Alloy development for thixoforming[C]// Proceedings of the Sixth International Conference on Semi-Solid Processing of Alloys and Composites.Turin,Italy,2000:443-450.
  • 3LIU D,ATKINSON H V,KAPRANOS P,JIRATTITICHAROEAN W,JONES H.Microstructure evolution and tensile mechanical properties of thixoformed high performance aluminum alloys[J].Mater Sci Eng A,2003,A361:213-224.
  • 4TZIMAS E,ZAVALIANGOS A.A comparative characterization of near-equiaxed microstructures as produced by spray casting,magnetohydrodynamic casting and the stress induced,melt activated process[J].Mater Sci Eng A,2000,A289:217-227.
  • 5KANG C G,SEO P K,JEON Y P.Thixo diecasting process for fabrication of thin-type component with wrought aluminum alloys and its formability limitation[J].Journal of Materials Processing Technology,2005,160:59-69.
  • 6CHOI J C,PARK H J.Microstructure characteristics of aluminum 2024 by cold working in the SIMA process[J].Journal of Materials Technology,1998,82:107-116.
  • 7RACHMAT R S,TAKANO H,IKEYA N,KAMADO S,KOJIMA Y,RO(O)SZ A,RETTENMAYR M,WATRING D.Application of semi-solid forming to 2024 and 7075 wrought aluminum billets fabrication by the EMC process[J].Materials Science Forum,2000,329/330:487-492.
  • 8DONG J,CUI J Z,LE Q C,LUG M.Liquidus semi-continuous casting,reheating and thixoforming of a wrought aluminum alloy 7075[J].Mater Sci Eng A,2003,A345:234-242.
  • 9XIA K,TAUSIG G.Liquidus casting of a wrought aluminum alloy 2618 for thixoforming[J].Mater Sci Eng A,1998,A246:1-10.
  • 10FLEMINGS M C.Behavior of metal alloys in the semi-solid state[J].Metall Trans,1991,A22(4):957-981.

共引文献19

同被引文献50

引证文献8

二级引证文献13

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部