期刊文献+

多孔丝网作两相毛细泵环毛细芯的研究 被引量:4

Reseach on Capillary Pumped Loop with Screen Mesh Capillary Wick
下载PDF
导出
摘要 建立了一套毛细泵环路热管及其性能测试系统,采用不同多孔丝网构成了3种毛细芯,在以水为工质的毛细泵环路热管运行中做了实验。实验表明复合芯的热阻比单一丝网的热阻小8%,复合芯的传热极限比单一丝网的传热极限高3%。因此丝网毛细芯的结构对CPL传热性能有较大影响,采用复合毛细芯可以得到较好的传热性能。 Multi-layer copper screen meshes can be used as capillary wicks. A CPL was fabricated to investigate performance of three screen mesh capillary wicks. This CPL used distilled water as working fluid. Experimental results show that complex screen mesh capillary wick better than other two capillary wicks composed of single kind of screen mesh. The thermal resistance of complex wick is 8% lower than that of single kind of screen mesh wick. The maximum heat flux density is 3% higher than that of single kind of screen mesh wick.
出处 《流体机械》 CSCD 北大核心 2008年第7期9-12,24,共5页 Fluid Machinery
基金 广东省自然科学基金项目(07118064)
关键词 毛细泵环 两相传热 金属丝网 capillary pumped loop (CPL) two-phase heat transfer screen mesh
  • 相关文献

参考文献7

  • 1李强,宣益民,陈小波.小型CPL用高性能烧结毛细芯的研制[J].粉末冶金技术,2005,23(5):330-333. 被引量:7
  • 2Eduardo Con alves Reimbrecht, M rcio Celso Fredel, Edson Bazzo. Manufacturing and Microstructural Characterization of Sintered Nickel Wicks for Capillary Pumps[ J ]. Materials Research, 1999, (3) : 225 - 229.
  • 3Mohammed Hamdan, Debra Cytrynowicz, Praveen Medis. Loop Heat Pipe (LHP) Development by Utilizing Coherent Porous Silicon (CPS) Wicks [ A ]. 2002 inter Society conference of Thermal Phenomena[ C ]. USA: IEEE ,2002. 457-465.
  • 4李勇,汤勇,肖博武,李西兵,曾志新.铜热管内壁微沟槽的高速充液旋压加工[J].华南理工大学学报(自然科学版),2007,35(3):1-5. 被引量:23
  • 5Kempers R, Ewing D, Ching C Y. Effect of number of mesh layers and fluid loading on the performance of screen mesh wicked heat pipes [ J ]. Applied Thermal Engineering, 2006,26:589-595.
  • 6Jianlin Yu, Hua Chen, Hua Zhao. An experimental investigation on capillary pumped loop with the meshes wick [ J ]. International Journal of Heat and Mass Transfer, 2007,50: 4503-4507.
  • 7池勇,汤勇,万珍平,陈平.微电子芯片高热流密度相变冷却技术[J].流体机械,2007,35(4):50-55. 被引量:10

二级参考文献48

  • 1何叶,李磊民,杨涛.基于MEMS技术的新型微冷却方式[J].仪表技术与传感器,2004(9):43-45. 被引量:9
  • 2张亚平,冯全科,余小玲.微热管在电子器件冷却中的应用[J].国外电子元器件,2006(9):11-15. 被引量:17
  • 3廖际常 张正德.粉末冶金多孔材料(下册)[M].北京:冶金工业出版社,1979..
  • 4Jentung Ku. Recent advances in capillary pumped loop technology.National Heat Transfer Conference of America, 1997.
  • 5Eduardo G R, M&rcio C F, Edison B, et al. Manufacturing and microstructural characterization of sintered nickel wicks for capillary pumps. Materials Research, 1999, 2(3): 225-229.
  • 6Eduardo G R, Paulo A P W, Mdrcio C F, et 81. Manufacturing offlat porous structures for capillary pump applications. Key Engineering Materials, 2001, 189 - 191 : 455-460.
  • 7Tracey V A. Pressing and sintering of nickel powders. International Journal of Powder Metallurgy and Powder Technology, 1984, 20(4) : 281-285.
  • 8廖际常.粉末冶金多孔材料(上册)[M].北京:冶金工业出版社,1979..
  • 9Fantozzi F, Filippeschi S, Sasin V J, et al. Heat Transport Device Based On Pulsing Thermosyphons With Forced Fluctuations Of Pressure[A]. 12th IHPC [C]. 2002.
  • 10Gima S, Nagata T, Zhang X, et al. Indirect cooling of IC chips using a two phase closed thermosyphon loop[J]. ADV ELECTR PACK, 2003, 2:337-342.

共引文献37

同被引文献102

引证文献4

二级引证文献17

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部