摘要
首先测量了5种不同类型矿粉的粒径、比表面积、亚甲蓝值、干捣空隙率和沉淀空隙率,同时进行了德国矿粉试验和液塑限试验,然后测试了各矿粉配制胶浆的使用性能,最后进行了矿粉指标与胶浆性能的相关性分析。试验结果表明:7种测试方法对矿粉性质有不同的适用性;矿粉类型对胶浆性能有重要影响,即有必要对矿粉类型进行筛选;考虑到测试方法的可推广性,推荐以干捣试验和德国矿粉试验作为矿粉高温性能和施工性能的评价方法,以亚甲蓝试验作为矿粉低温性能的评价方法。
Firstly, authors measured granularity, specific surface area, methylene compaction pore ratio and deposition pore ratio. German mineral filler test an blue value, dry d liquid-plastic limitation test were carried out. Then, the service performance of the mortar made with the mineral fillers was tested. Finally, the relativity between mineral filler index and mortar performance was analyzed. It is found that the applicabilities of seven tests are different to mineral filler. Mortar performance test proves that mineral filler type has great influence on mortar performance, so it is necessary to select filler type. Considering the test popularization character, dry compaction test and German mineral filler test are chosen as evaluation method of high temperature and construction performance of filler and methylene blue test is chosen as evaluation method of low temperature performance of filler.
出处
《中国公路学报》
EI
CAS
CSCD
北大核心
2008年第4期6-11,共6页
China Journal of Highway and Transport
基金
国家自然科学基金项目(50478095)
国家西部交通建设科技项目(200631881221)
湖南省自然科学基金项目(07JJ6091)
关键词
道路工程
沥青混合料
试验研究
性能指标
矿粉
road engineering
asphalt mixture
experimental research
performance index
mineral filler