期刊文献+

复吹转炉底枪布置优化探讨 被引量:15

Discussion on bottom tuyere configuration optimization of top and bottom combined blown converters
原文传递
导出
摘要 通过复吹转炉底枪布置优化试验研究,结果表明底枪采用合适支数,特别是采取非对称集中布置方式,更有利于加强熔池搅拌强度。三明钢厂100t复吹转炉底枪在国内首次采用非对称集中布置方案,实践应用结果表明冶炼终点各项技术指标得到很大的改善。 It is shown from the experiments for the bottom tuyere configuration optimization in combined blown converters that the bath stirring intensity can be enhanced by using a suitable number of bottom tuyeres and especially by positioning those bottom tuyeres in an asymmetrical and integrated configuration. Application of such an asymmetrical and integrated bottom tuyere configuration in the 100 t combined blown converter of Sanming Iron & Steel Co. is the first in the metallurgical sector of the Country and practical results show that all metallurgical parameters for the converter melting have been greatly improved.
出处 《炼钢》 CAS 北大核心 2008年第4期52-55,共4页 Steelmaking
关键词 复吹转炉 底枪 对称与非对称布置 熔池混匀时间 combined blown converter bottom tuyere symmetrical or asymmetrical configuration complete mixing time of bath
  • 相关文献

参考文献4

  • 1张荣生,陈龙根,周毅生.顶底复吹冶炼熔池搅拌的水力学研究[C]//全国转炉炼钢会议文选.北京:中国金属学会炼钢学术委员会,冶金部钢铁司,1982:252-264.
  • 2赵永久,何国梁,阎峰等.国外转炉顶底复合吹炼技术(上)[M].钢铁编辑部出版,1985:255-264.
  • 3朱英雄,钟良才.复吹转炉底枪优化布置探讨[C]//第一届全国转炉炉炼钢学术会议论文集.中国金属学会转炉炼钢学术委员会,2003:299-303.
  • 4徐文派.转炉炼钢学[M].北京:冶金工业出版社,1983:282.

同被引文献115

引证文献15

二级引证文献72

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部