期刊文献+

小壁厚组合截面冷弯薄壁型钢构件承载力研究

Study on Bearing Capacity of Cold-formed Build-up Section Steel Members with Thin Thickness
下载PDF
导出
摘要 根据美国钢铁协会(AISI)的试验资料对背靠背双拼冷弯薄壁卷边槽型截面横梁的承载力试验进行了介绍,并将试件的试验承载力与GB 50018—2002冷弯薄壁型钢结构技术规范中规定的计算结果作了比较。对比结果表明,按照GB 50018—2002规定计算厚度小于2 mm冷弯薄壁型钢受弯构件承载力是可行的。 This paper introduced the cold-formed steel doubled back-to-back C-sections header assembly tests according to the test data from American Iron and Steel Institute (AISI). The test beating capacity of the members had been compared with the calculated results based on the provisions of Chinese current' code, "Technical code of cold-formed thin-walled steel structures" GB 50018-2002 The results showed that the process of calculating bearing capacity according to Chinese code GB50018-2002 was feasible.
作者 孙亚楠
出处 《太原科技》 2008年第8期69-70,共2页 Taiyuan Science and Technology
关键词 冷弯型钢 背靠背双拼 C型截面 承载力研究 cold-formed steel doubled back-to-back C-section bearing capacity study
  • 相关文献

参考文献2

  • 1中华人民共和国建设部.GB50018-2002冷弯薄壁型钢结构技术规范[S].北京:中国计划出版社,2002.
  • 2于炜文.冷成型钢结构设计[M].董军,夏冰青,译.3版.北京:中国水利水电出版社,2003.

共引文献12

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部