期刊文献+

高透明水性聚氨酯胶粘剂的制备 被引量:4

Study on Synthesis of High-transparent Water-borne of Polyurethane
下载PDF
导出
摘要 采用聚酯二元醇与二异氰酸酯反应合成了高透明水性聚氨酯胶粘剂,探讨了影响水性聚氨酯透明性、力学性能及稳定性等的有关因素。研究发现,用芳香族聚酯二元醇与TDI/HDI反应,控制R值为1.4左右,扩链剂DMPA的加入量约为3.5%时,可获得综合性能较好的高透明性水性聚氨酯胶粘剂。 High-transparent water-borne of polyurethane were synthesized using polyester diols with di-isocyanates. Factors affecting storage stability, mechanical properties and transparent property were researched.The results showed that high-transparent water-borne of polyurethane latex synthesized by aromatic polyester diols with TDI/HDI had good stability, the integral pcrformances of emulsion is optimum when R value was 1.4 and the amount of extender(DMPA) was 3.5 %
出处 《广东化工》 CAS 2008年第8期10-12,共3页 Guangdong Chemical Industry
关键词 水性聚氨酯 胶粘剂 透明性 稳定性 aqueous polyurethane adhesive transparent stability
  • 相关文献

参考文献5

二级参考文献57

  • 1胡剑青,涂伟萍,夏正斌.有机硅改性丙烯酸聚氨酯杂合水分散体的合成研究[J].化工进展,2004,23(5):536-540. 被引量:37
  • 2王金平,贾梦秋.丙烯酸树脂交联改性水性聚氨酯乳液[J].北京化工大学学报(自然科学版),2004,31(5):60-63. 被引量:14
  • 3胡津昕,孙多先.软段含羧基的水性聚氨酯相反转过程研究[J].聚氨酯工业,2002,17(4):20-23. 被引量:10
  • 4Zuo M, Takeichi T. Preparation and characterization of poly(urethane-imide) films prepared from reactive polyimide and polyurethane prepolymer. Polymer, 1999, 40(18): 5 153~5 160
  • 5Bibiao J, Jianjun H, Wenyun W, et al. Synthesis and thermal properties of poly (urethane-imide). J. Appl.Polym. Sci., 2001, 81:773~781
  • 6Chian K S, Yi S, Synthesis and characterization of an isocyanate-oxazolidone polymer: effect of stoichometry.J. Appl. Polym. Sci., 2001, 82:879~888
  • 7Duan. Aqueous non-gelling, anionic polyurethane dispersions and process for their manufacture[P]. US:5610232,1997-03-11.
  • 8Coogan.Aqueous dispersions[P].US:4927876,1990-05-22.
  • 9Toyo油墨公司(日).不需除溶剂的包含自由基共聚物的水性聚氨酯制备方法[P].JP:09-165407.1997.
  • 10Tirpak R E,Markusch P H. Aqueous dispersions of crosslinked polyurethanes[J]. Journal of Coatings Technology, 1986,58:738.

共引文献29

同被引文献84

引证文献4

二级引证文献8

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部