摘要
本文对镁合金的超塑性获得方法给予介绍,并讨论了几个影响镁合金超塑性的因素,然后介绍了镁合金超塑性的发展趋势。
出处
《世界有色金属》
2008年第7期54-55,共2页
World Nonferrous Metals
参考文献3
-
1Baril G, Pebere N. The corrosion of pure Magnesium in aeratedand deaerated sodium sulphate solutions [J]. Corrosion Science, 2001,43(3):471-484.
-
2Kim W J, Park J D, Wang J Y, et al. Realization of low-temperature superplasticity in Mg- Al-Zn alloy sheets processed by differential speed rolling [J]. Scripta Materialia, 2007, 57(8):755-758.
-
3del Valle J A, Carreno F, Ruano O A. On the threshold stress for superplasticity in Mg-Al- Zn alloys [J]. Scripta Materialia,2007,57(9):829-832.
同被引文献31
-
1丁桦,张凯锋.材料超塑性研究的现状与发展[J].中国有色金属学报,2004,14(7):1059-1067. 被引量:33
-
2李志强,郭和平.超塑成形/扩散连接技术的应用与发展现状[J].航空制造技术,2004,47(11):50-52. 被引量:22
-
3白秉哲.超塑变形中“晶粒群”运动初探[J].塑性工程学报,1994,1(2):17-23. 被引量:6
-
4王刚,张凯锋,陈军,阮雪榆.超塑成形的钛合金波纹管壁厚分布规律研究[J].机械科学与技术,2006,25(1):95-98. 被引量:2
-
5欧文沛,黄伯云,贺跃辉,曲选辉,雷长明.TiAl金属间化合物超塑性研究状况[J].材料导报,1996,10(5):22-26. 被引量:2
-
6王敏,马彩霞.LY12铝合金在超塑性变形中的空洞行为[J].塑性工程学报,2007,14(1):27-30. 被引量:5
-
7RIDHA H. ExPlicit analysis of superplastic forming by the FEM including a pressure cycle control algorithm [ J]. International Journal of Materials and Product Tech nology, 2005,22(4) :299 - 312.
-
8LEE K S, HUH H. Simulation of superplastic formingdiffusion bonding with finite-element analysis using the convective coordinate system [ J ]. Journal of Materials Processing Technology, 1999 (89/90) :92 - 98.
-
9XU C,FURUKAVA M,HORITA Z, et al. Achieving a superplastic forming capability through severe plastic deformation [ J ]. Advanced Engineering Materials, 2003 (5) :359 - 364.
-
10吴诗悖.金属超塑性变形理论[M].北京:国防工业出版社,1997..
引证文献2
-
1于彦东,冯娟,吕新宇,王国军.镁合金双层板超塑成形/扩散连接工艺及模拟[J].材料科学与工艺,2011,19(1):80-84. 被引量:2
-
2韩莹,何实,吕晓春,郭枭,焦帅杰.粗晶铝合金超塑性变形机理的研究现状[J].焊接,2023(3):11-21.
-
1陈松林,赵吉宾,乔红超,杨灏.高应变率下材料本构模型参数的获得方法[J].中国有色金属学报,2015,25(12):3381-3388. 被引量:1
-
2王东哲,吕冬,何丹农,娄臻亮,张永清,蒋镜昱.板料成形中压边力的控制理论研究[J].锻压技术,2000,25(4):18-20. 被引量:19
-
3付自力.表面粗糙度的重要性及正确获得方法[J].职业,2007(17):51-51. 被引量:2
-
4蒋志方,杨静,谷元.冲裁件压力中心的确定及图形处理[J].计算机应用,1998,18(10):44-46. 被引量:2
-
5韩光海.无碳化物贝氏体在曲轴上的应用与展望[J].沈阳工程学院学报(自然科学版),2003(3):48-50.
-
62006喷射成形国际会议简介(3)——喷射成形铁基合金[J].理化检验(物理分册),2007,43(5):268-270.
-
7魏春雨.平均单位轧制压力P的分析[J].鞍钢技术,1995(12):16-20.
-
8赵明书,郭福,毛智勇,李晋炜.TA15钛合金电子束焊平行焊缝的获得方法[J].新技术新工艺,2009(2):105-107. 被引量:4
-
9王东哲,娄臻亮,张永清.薄板拉深工艺中压边力闭环控制的研究现状[J].机械工程师,2000(7):7-10. 被引量:2
-
10王泾文,周红生.高速钢高温形变典型组织透射电镜分析[J].钢铁,1999,34(8):45-48. 被引量:3