摘要
目的研究壳聚糖对印染废水的吸附性能。方法探讨了不同的壳聚糖用量(0~500 mg/L)、pH 值(1~13)、吸附温度(20~50℃)和吸附时间(0.5~2.5 h)对吸附效果的影响。结果在常温下,当 pH 值为2~5时,200mg/L 壳聚糖吸附0.5 h就可以对印染废水中的染料进行很好地吸附,脱色率在90%以上。结论壳聚糖可较好地吸附印染废水中的染料。
Objective To study the adsorption performance of chitosan in printing and dyeing wastewater treatment. Methods The influence factors such as chitosan concentrations(0-500 mg/L), pH value( 1-13 ),temperatures(20-50 ℃) and time(0.5-2.5 h ) were considered in the test. Results When the concentration of chitosan was 200 mg/L, pH value was 2-5,time was 0.5 h and at the room temperature, the absorption could show a good result. The decolorizing rate could reach above 90%. Conclusion The chitosan concentrations, pH value, time and temperature affect the adsorption performance of chitosan in printing and dyeing wastewater treatment.
出处
《环境与健康杂志》
CAS
CSCD
北大核心
2008年第8期688-690,共3页
Journal of Environment and Health
基金
安徽省教育厅自然科学基金重点项目(2003kj008zd)
关键词
水净化
水污染
壳聚糖
印染废水
吸附
Water purification
Water pollution
Chitosan
Printing and dyeing wastewater
Adsorption