摘要
通过TEM对SiCP和短碳纤维混杂增强ZA27复合材料界面特性和微观结构观察,发现SiCP与基体之间的界面部分区域有不连续的界面析出产物。碳纤维与基体之间的界面结合较好,同样部分区域有不连续的界面析出产物。这些析出相均为铜锌铝相。此外,碳纤维与基体界面之间部分区域存在一层碳黑,这是因为碳纤维脱胶不完全引起的。此外,增强体微区分布不均匀。
The interfaces and microstructures of SiC P and short carbon fiber hybrid reinforced ZA27 composites have been observed through Transmission Electron Microscope and it was found that discontinuous interfacial precipitated products of rich copper ZnAl phase were formed at a part of areas among SiC P and short carbon fiber and ZA27 alloy matrix. The part of interfaces between carbon fiber and ZA27 alloy matrix had a layer of carbon because of the incomplete degum of carbon fibers. Besides, the reinforcements in microareas mainly aggregated at the end of solidification position of ZA27 alloy and showed nonuniform distribution.
出处
《复合材料学报》
EI
CAS
CSCD
北大核心
1997年第3期20-24,共5页
Acta Materiae Compositae Sinica
基金
自然科学基金
关键词
真空压力浸渍
锌铝基
复合材料
界面
微结构
vaccum high pressure infiltration composite process, zinc aluminium matrix composite, interface