期刊文献+

基于互四阶累积量的谐参数联合估计的TLS-ESPRIT方法 被引量:2

TLS-ESPRIT Approach to the Joint Estimation of Harmonic Parameters Based on Cross Fourth-order Cumulants
下载PDF
导出
摘要 导出了混合色噪声中复值随机谐波信号和实值随机谐波信号的互四阶累积量及对角切片,利用这些对角切片皆可估计出相同的频率和相移,但根据实值随机谐波所估计的互功率为复值随机谐波的3/16.将互四阶累积量与高分辨率的ESPRIT方法结合,提出了在混合色噪声中基于互四阶累积量的谐参数联合估计的TLS- ESPRIT方法.研究结果表明,基于互四阶累积量的谐参数联合估计TLS-ESPRIT方法可抑制混合色噪声,具有优越的参数估计性能. The cross fourth-order cumulants and their diagonal slices are respectively derived for both complex-and real-valued stochastic harmonic signals in hybrid colored noises. These diagonal slices can be used to estimate the same frequencies and phase shifts, but the different cross powers with the scale factor 3/16 with respect to complex and real-valued cases. By combining the cross fourth-order cumulants with high-resolution ESPRIT (estimation of signal parameters via rotational invariance techniques) algorithm, a TLS-ESPRIT approach to jointly estimating harmonic parameters in hybrid colored noises is presented. The simulation results demonstrated that the proposed joint estimation approach to harmonic parameters can suppress the hybrid colored noises, and retrieval the harmonic parameters with excellent estimation performance.
出处 《北京工业大学学报》 EI CAS CSCD 北大核心 2008年第8期792-799,共8页 Journal of Beijing University of Technology
基金 国家自然科学基金(50775099) 教育部博士点基金(20070183104).
关键词 谐波恢复 互高阶累积量 混合色噪声 harmonic retrieval cross high-order cumulants hybrid colored noise
  • 相关文献

参考文献14

  • 1SHI Z, FAIRMAN F W. Harmonic retrieval via state space and fourth-order eumulants [J]. IEEE Trans on Signal Processing, 1994, 42(5): 1109-1119.
  • 2ZHANG X D, LI Y D. Harmonic retrieval in mixed gaussian and non-Gaussian ARMA noises[J]. IEEE Trans on Signal Processing, 1994, 42(12): 3539-3543.
  • 3CHICHARO J F, WANG H. Power system harmonic signal estimation and retrieval for active power filter applications[J]. IEEE Trans. on Power Electronics, 1994, 9(6) : 580-586.
  • 4ANDERSON J M M, GIANNAKIS G B. 2-D harmonic retrieval using higher-order statistics[J ]. Multidimensional Systems and Signal Processing, 1995, 6(4) : 313-331.
  • 5GHARIEB Reda R. New results on employing cumulants for retrieving sinusoids in colored non-Gaussian noise[J]. IEEE Trans on Signal Processing, 2000, 48(7) ~ 2164-2168.
  • 6刘志君,康晓涛,张丽丽,石要武.基于状态空间模型谐波恢复的Tls-Hankel法[J].吉林大学学报(工学版),2008,38(1):224-228. 被引量:5
  • 7窦慧晶,王树勋,汪飞.相关乘性和加性噪声共存背景下的谐波恢复[J].吉林大学学报(工学版),2005,35(1):76-80. 被引量:3
  • 8于骏一 郑德涛.耦合型切削颤振的相位诊断.机械工程学报,1984,20(3):61-72.
  • 9于骏一 吴博达.再生型颤振诊断技术的研究.机械工程学报,1986,22(3):39-49.
  • 10兰华,石要武,金晟,贾清泉,敖丽敏.混合噪声下正弦参数估计互高阶谱MUSIC方法[J].电工技术学报,2001,16(2):70-74. 被引量:9

二级参考文献28

  • 1马彦,石要武,孙文涛.高分辨率谐波恢复的互四阶累积量ESPRIT-SVD方法1[J].吉林大学学报(信息科学版),2002,20(1):30-32. 被引量:8
  • 2梁应敞,王树勋,戴逸松.非高斯有色噪声中的正弦信号频率估计[J].电子学报,1995,23(4):111-114. 被引量:7
  • 3石要武,戴逸松,丁宏.有色噪声背景下正弦信号频率估计的互谱Pisarenko和MUSIC方法[J].电子学报,1996,24(10):46-50. 被引量:42
  • 4SWAMI A, MENDEL J M. Cumulant-based approach to harmonic retrieval problem [C] // Proceeding of 1988 IEEE ICASSP,USA, 1988.
  • 5ZHANG Yan,WANG Shuxun. Harmonic retrieval in colored non-Gaussian noise cumulants[J]. IEEE Trans,2000, SP-48(4) :982-987.
  • 6MORREN G, LEMMERLING P, HUFFEL S V.Decimative subspace based parameter estimation techniques[J]. Signal Processing, 2003,83 : 1025 -1033.
  • 7BESSON O, STOICA P. Analysis of MUSIC and ESPRIT frequency estimate for sinusoidal signal with low-pass envelops[J]. IEEE Trans 1996,SP-44(9) :2359-2364.
  • 8DWYER R F. Fourth-order spectra of Gaussian amplitude modulated sinusoids[J]. Journal of the Acoust Soc, 1991,90:918-926.
  • 9SWAMI A. Muhiplieative noise models: parameter estimation using cumulants[J]. IEEE Trans, 1994, 36(3) :355-373.
  • 10GEORGIOS B Giannakis, ZHOU Guotong. Harmonics in muhiplieative and additive parameter estimation using eyelie statisties[J]. IEEE Trans.1995 ,SP- 43 (9) :2217-2221.

共引文献17

同被引文献22

  • 1梁睿君,叶文华.薄壁零件高速铣削稳定性预测与验证[J].机械工程学报,2009,45(11):146-151. 被引量:27
  • 2马彦,石要武,孙文涛.高分辨率谐波恢复的互四阶累积量ESPRIT-SVD方法1[J].吉林大学学报(信息科学版),2002,20(1):30-32. 被引量:8
  • 3LEYENS C, PETERS M. Titanium and titanium alloys [M]. Weinheim: Wiley-VCH Verlag GmbH & Co KGaA, 2003.
  • 4LINEBRGER, LANE. Titanium aerospace alloys [ J ]. Advanced Materials & Processes, 1998,153 ( 5 ) :45.
  • 5CAMPA F J, de LACALLE LOPEZ L N, CELAYA A. Chatter avoidance in the milling of thin floors with bullnose end mills:model and stability diagrams [J]. International Journal of Machine Tools & Manuf-acture, 2011, 51 ( 1 ) :43-53.
  • 6AHMADI K, ISMALL F. Machining chatter in flank milling[J]. International Journal of Machine Tools& Manufacture, 2010, 50(1): 75-85.
  • 7ZATARAIN M, MUNOA J, PEIGNE G, et al. Analysis of the inlunce of mill helix angle on chatter stability[J]. CIRP Annals-Manufacturing Technology, 2006, 55 ( 1 ) : 365 -368.
  • 8ADETORO O B, SIM W M, WEN P H. An improved prediction of stability lobes using nonlinear thin wall dynan-tics [J].Journal of Materials Processing Technology, 2010, 210(6): 969-979.
  • 9ALT1NTAS Y, EYNIAN M, ONOZUKA H. Identi fication of dynamic cutting force coefficients and chatter stability with process damping [ J ]. CIRP Annals Manufacturing Technology, 2008, 57(61) : 371-374.
  • 10ARMANDO Italo Sette Antonialli, ANSELMO Eduardo Diniz, ROBSON Pederiva. Vibration analysis of cutting force in titanium alloy milling [ J ]. International Journal of Machine Tools & Manuf-acture, 2010, 50( 1): 65-74.

引证文献2

二级引证文献19

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部