Effects of correlative factors on the interdendritic melt flow brought by the bulge in continuous casting slabs
被引量：3
Effects of correlative factors on the interdendritic melt flow brought by the bulge in continuous casting slabs
基金
This study was financially supported by the National Natural Science Foundation of China (No.50374043).
参考文献17
-
1曹海峰,沈厚发,柳百成.Pb-Sn合金侧向凝固过程A偏析的数值模拟[J].材料研究学报,2005,19(6):594-600. 被引量：3
-
2王岩,赵美,常国威.连铸板坯鼓肚量的计算[J].辽宁工学院学报,2005,25(1):23-25. 被引量：7
-
3韩志强,柳百成.垂直定向凝固条件下通道偏析形成过程的数值模拟[J].金属学报,2003,39(2):140-144. 被引量：12
-
4沈厚发,C.Beckermann.糊状区变形及浓度再分布的模拟实验[J].金属学报,2002,38(4):352-358. 被引量：6
-
5常国威,赵增武,王静松,王万军,王新华.Solute distribution in columnar crystal zone of continuous casting billets[J].中国有色金属学会会刊：英文版,2001,11(5):708-711. 被引量：2
-
6孙蓟泉,盛义平,张兴中.连铸板坯的鼓肚变形与应力分析[J].钢铁研究学报,1996,8(1):11-15. 被引量：14
-
7Jie Wanqi.Further discussions on the solute redistribution during dendritic solidification of binary alloys[J].Metallurgical and Materials Transactions B.1994(5)
-
8A. Kusano,H. Misumi,H. Chiba, et al.The formation mechanism of center-line cracking on the continuous cast slab[].J Iron Steel Inst Jpn.1998
-
9K. Miyazawa,and K. Schwerdtfeger.Computation of bulging of continuously cast slabs with simple bending theory[].Ironmaking and Steelmakeing.1979
-
10H. Fujii,T. Ohashi,and T. Hiromoto.On the formation of internal cracks in continuously cast slabs[].Transactions of ISIJ.1978
二级参考文献36
-
1高宇,沈厚发,马长文,黄天佑.Pb-Sn合金凝固通道偏析的实验与数值模拟研究[J].铸造,2004,53(10):814-818. 被引量：4
-
2刘慰俭,戴一一.液芯连铸坯壳鼓肚变形的研究[J].重型机械,1994(4):10-16. 被引量：1
-
3盛义平，钢铁，1993年，28卷，3期，20页
-
4陈家祥，连续铸钢手册，1991年
-
5刘明延，板坯连铸机设计与计算，1990年
-
6鲁开嶷，连续铸钢的热过程，1987年
-
7杨耀乾，平板理论，1984年
-
8鲁捷斯 B C，连续铸钢原理，1977年
-
9苏翼林.材料力学(下册)[M].北京:人民教育出版社,1982..
-
10Flemings M C, Nereo G E. TMS AIME, 1967; 239:1449
共引文献34
-
1刘宏昭,王忠民.板坯连铸凝壳的热变形分析[J].机械工程学报,2006,42(3):64-67. 被引量：5
-
2曹海峰,沈厚发,柳百成.镍基高温合金定向凝固斑点偏析的数值模拟研究[J].稀有金属材料与工程,2006,35(12):1849-1853. 被引量：6
-
3焦晓凯,秦勤,吴迪平,宁振宇.板坯连铸铸坯鼓肚变形的仿真研究[J].冶金设备,2007(1):9-12. 被引量：6
-
4隋大山,崔振山.铸造钢锭宏观偏析的数值模拟[J].热加工工艺,2008,37(1):70-72. 被引量：8
-
5陈淑英,常国威,吴春京.连铸钢坯一次枝晶间距及“鼓肚”的影响[J].钢铁研究学报,2008,20(7):15-18. 被引量：2
-
6CHEN Shu-ying,CHANG Guo-wei,YUE Xu-dong,WU Chun-jing.Solute Distribution in Columnar Crystal Zone and Influences of Correlative Factors for Continuous Casting Slabs[J].Journal of Iron and Steel Research(International),2008,15(4):21-25.
-
7赖朝彬,辛博,陈伟庆,吕瑞国,吴绍杰.连铸板坯二次枝晶臂间距对中心碳偏析的影响[J].炼钢,2009,25(4):42-45. 被引量：12
-
8亓俊杰,梁小平,姚雁文,任宏晋.大型钢锭A偏析的形成机理及影响因素[J].大型铸锻件,2010(3):42-45. 被引量：9
-
9田陆,张丹.轻压下枝晶变形及溶质分布的试验模拟研究[J].连铸,2011,36(1):10-14. 被引量：7
-
10FU JianXun,LI JingShe,ZHANG Hui.Mechanism of broadening of slab in continuous casting[J].Science China(Technological Sciences),2011,54(5):1228-1233. 被引量：1
同被引文献14
-
1ZUO JianPing1,2, XIE HePing2,3, ZHOU HongWei1,2 PENG SuPing1 1 State Key Laboratory of Coal Resources and Safe Mining, China University of Mining and Technology, Beijing 100083, China,2 Institute of Rock Mechanics and Fractals, China University of Mining and Technology, Beijing 100083, China,3 Sichuan University, Chengdu 610065, China.Thermal-mechanical coupled effect on fracture mechanism and plastic characteristics of sandstone[J].Science China(Technological Sciences),2007,50(6):833-843. 被引量：12
-
2盛义平,孙蓟泉,章敏.连铸板坯鼓肚变形量的计算[J].钢铁,1993,28(3):20-25. 被引量：24
-
3林启勇,蒋欢杰,朱苗勇.连铸坯动态轻压下的压下参数分析[J].材料与冶金学报,2004,3(4):261-265. 被引量：36
-
4孙蓟泉,盛义平,张兴中.连铸板坯的鼓肚变形与应力分析[J].钢铁研究学报,1996,8(1):11-15. 被引量：14
-
5雷华,杨拉道,曾晶,田松林,王文学.板坯连铸弯曲阶段力能参数计算方法探讨[J].重型机械,2007(3):41-45. 被引量：1
-
6Di-feng Wu,Shu-sen Cheng,Zi-jian Cheng.Characteristics of shell thickness in a slab continuous casting mold[J].International Journal of Minerals,Metallurgy and Materials,2009,16(1):25-31. 被引量：3
-
7付建勋,李京社,汪春雷,朱经涛.Q235钢杨氏弹性模量的研究[J].材料导报,2009,23(18):68-70. 被引量：12
-
8付建勋,李京社,张慧,张兴中.连铸过程板坯展宽与结晶器设置的研究[J].炼钢,2010,26(1):62-65. 被引量：1
-
9付建勋,李京社,张慧,张兴中.铸坯展宽现象及其与拉速的关系[J].钢铁研究学报,2010,22(2):9-11. 被引量：3
-
10付建勋,李京社,张慧.连铸二冷区铸坯展宽现象的黏弹塑性分析[J].金属学报,2010,46(1):91-96. 被引量：2
引证文献3
-
1付建勋,李京社,张慧,张兴中,沈昶,刘学华,张乔英.连铸过程板坯展宽矫正的研究[J].北京科技大学学报,2009,31(S1):173-176.
-
2Jian-xun Fu,Jing-she Li,Hui Zhang.Effects of the width and thickness of slabs on broadening in continuous casting[J].International Journal of Minerals,Metallurgy and Materials,2010,17(6):723-728. 被引量：1
-
3FU JianXun,LI JingShe,ZHANG Hui.Mechanism of broadening of slab in continuous casting[J].Science China(Technological Sciences),2011,54(5):1228-1233. 被引量：1
-
1CHEN Shu-ying,CHANG Guo-wei,YUE Xu-dong,WU Chun-jing.Solute Distribution in Columnar Crystal Zone and Influences of Correlative Factors for Continuous Casting Slabs[J].Journal of Iron and Steel Research(International),2008,15(4):21-25.
-
2孙登月,侯广义,张军营.激光熔覆ZrO_2-8%Y_2O_3涂层提高轧辊抗热冲击性能的研究[J].燕山大学学报,2014,38(3):216-220. 被引量：5
-
3G.W. Chang G.C. Jin S.Y. Chen X.D. Yue.RESEARCH ON THE FORMATION MECHANISM OF INTERNAL CRACK IN THE CONTINUOUS CASTING SLAB[J].Acta Metallurgica Sinica(English Letters),2007,20(1):35-39. 被引量：6
-
4D.F. Wu S.S. Cheng.EFFECT OF SEN DESIGN ON SURFACE FLUCTUATION AND SOLIDIFYING SHELL IN SLAB MOLD AND ITS OPTIMIZATION[J].Acta Metallurgica Sinica(English Letters),2008,21(5):341-350. 被引量：2
-
5LIU Xufeng ZHENG Hongguang WANG Yan.Research on the trajectory of non-metal inclusions with the flow in the mold during the solidification of continuous casting slabs[J].Baosteel Technical Research,2011,5(1):51-55.
-
6高磊,梁松茂,陈荣石,韩恩厚.Correlation of recalescence with grain refinement of magnesium alloys[J].中国有色金属学会会刊：英文版,2008,18(A01):288-291. 被引量：1
-
7Zhou, Weixian, Zhou, Xin.DETERMINATION OF STATES OF STRESS AND STRAIN AT POLE OF HYDRAULIC BULGE ORTHOTROPIC SHEET SAMPLE[J].中国有色金属学会会刊：英文版,1995,5(3):84-87.
-
8LIU Hao CHEN Li-liang ZHOU Jian-xin LIAO Dun-ming.Simulation of Induction Heating Process of Continuous Casting Slab[J].Computer Aided Drafting,Design and Manufacturing,2007,17(1):54-59.
-
9朱小龙.Correlation of seawater corrosion and processing of Cu Ni alloy tubes[J].中国有色金属学会会刊：英文版,2000,10(2):131-138.
-
10Shu-li Li,Run Wu,Yuan-zheng Wei,Zhi-fang Wu,Xue-jun Zhou,Yong-fu Zhang,Cruang Xu.Correlation of morphological anisotropy and Lankford value of deep drawing sheets hot-rolled by compact strip production[J].International Journal of Minerals,Metallurgy and Materials,2012,19(10):934-938. 被引量：1
