期刊文献+

外加剂对碳化硅-水系统流动性能影响研究

THE STUDY ABOUT ADMIXTURES HOW TO INFLUENCE THE FLOW PERFORMANCE OF SILICON-CARBIDE-WATER SYSTEM
下载PDF
导出
摘要 碳化硅-水系统流动性能对碳化硅制品的密度有很大影响,本文用十二烷基硫酸钠、萘系磺酸盐UNF-5、柠檬酸三钠、碳酸钠、无水乙酸钠做减水剂对碳化硅-水系统流动性能进行了研究。实验结果表明,外加剂加入量对碳化硅-水系统粘度有较大影响,在所选外加剂中萘系磺酸盐UNF-5是降低粘度效果最好的,合适的加入量为0.3g/100gSiC;系统的pH值在7左右时,碳化硅-水系统粘度最小,粘度为17mPa·S。 The flow Performance of silicon-carbide-water system has significant impacts on the density of silicon-carbide products. This paper has studied the flow Performanc of silicon-carbide-water system with sodium dodecyl sulfate, Naphthalene Sulfonate UNF-5, Sodium citrate, sodium carbonate, Sodium acetate anhydrous as Superplasticizero The experimental results show that the amount of additive produces more effect on the viscosity of silicon-carbide-water system, among the Additives being selected Talampicillin Napsylate UNF-5 is the best one to reduce the viscosity, the Suitable dosage the is 0.3g/100gSiC; when the pH of the system is about 7, the viscosity of silicon-carbide-water system is smallest. 17mPa · S.
作者 葛伟青
机构地区 唐山学院
出处 《中国陶瓷》 CAS CSCD 北大核心 2008年第9期29-31,共3页 China Ceramics
关键词 碳化硅-水系统 粘度 外加剂 silicon-carbide-water system, viscosity, additive
  • 相关文献

参考文献5

二级参考文献35

  • 1刘公理,刘延武.低成本SiC棚板的研制[J].中国陶瓷,1996,32(4):31-32. 被引量:2
  • 2王润泽 刘延伶.改善耐火材料抗热冲击性的途径[J].耐火材料,1987,(1):7-12.
  • 3李晓明.Si02晶型转变的热力学分析[J].耐火材料,1994,3:64-65.
  • 4陈肇友.耐火材料抗热震性的预测与评定[J].耐火材料,1988,1:50-52.
  • 5李晓明 邓光明.添加高纯物质对碳化硅窑具性能的影响[J].陶瓷工程,2000,33(3):17-18.
  • 6Guo L C,J Am Ceram Soc,1998年,81卷,3期,549页
  • 7KATZ R N. Opportunities and prospects for the application of structural ceramics[A]. In: Wachtman J B, Jr, et al eds. Structural Ceramics, Treatise on Materials Science and Technology, Vol 29[C]. New York: Academic Press, Inc, 1989. 1-26.
  • 8SINGH J P. Effect of flaws on the fracture behaviour of structural ceramics [J]. Adv Ceram Mater, 1988, (3): 18-27.
  • 9ALFORD N M, BIRCHALL J D, KENDALL K. Engineering ceramics--the process problem [J]. Mater Sci Technol, 1986,(2):329-336.
  • 10LANG F F, METCALF M. Processing-related fracture origins:Ⅱ agglomerate motion and crack-like internal surface caused by differential sintering [J]. J Am Ceram Soc, 1983, 66:389-406.

共引文献91

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部