期刊文献+

三环传动系统振动特性研究 被引量:2

The vibration characteristics analysis for three-ring gear reducer
下载PDF
导出
摘要 采用有限元方法,考虑主传动构件的弹性,将传动部分整体作为研究对象,对三环减速器的传动系统进行固有频率和振型分析,研究三环减速器的振动特性。 Thinking about the elastic of the parts of the three-ring gear reducer,it builds a finite element analysis model, in order to study the vibration of the three-ring gear reducer,it calculates the frequencies and elastic stress and deformation of the main parts of the three-ring gear reducer.
出处 《机械设计与制造》 北大核心 2008年第9期82-84,共3页 Machinery Design & Manufacture
关键词 三环减速器 有限元 振动特性分析 Three-ring gear reducer Finite element analysis Vibration analysis
  • 相关文献

参考文献4

二级参考文献8

  • 1黄文振.三环减速器振动问题研究[J].机械工程学报,1994,30(2):64-68. 被引量:41
  • 2朱才朝.三环减速器振动控制的研究:博士学位论文[M].重庆:重庆大学,1998..
  • 3韩杰林,硕士学位论文,1993年
  • 4应海燕,机械传动,1992年,16卷,1期
  • 5朱才朝,博士学位论文,1998年
  • 6张策,弹性连杆机构的分析与设计(第2版),1997年
  • 7黄文震,机械工程学报,1994年,30卷,2期,64页
  • 8清华大学工程力学系,机械振动.上,1980年

共引文献52

同被引文献27

  • 1辛绍杰,李华敏,李瑰贤,张树江.用于抽油机的新型两级三环减速器的振动分析[J].中国机械工程,2001,12(z1):182-184. 被引量:4
  • 2刘建琴,张策,宋轶民,张俊.三环减速器的弹性静力分析[J].机械设计,2006,23(2):53-56. 被引量:3
  • 3崔建昆,张光辉.三环减速器偏心套微动磨损分析[J].机械设计,1996,13(12):31-32. 被引量:10
  • 4张俊,宋轶民,张策.Design and Dynamics Simulation of a Novel Double-Ring-Plate Gear Reducer[J].Transactions of Tianjin University,2007,13(3):163-168. 被引量:2
  • 5朱才朝.三环减速器的动力学及减振研究[D].重庆:重庆大学,1998.
  • 6YANG J M, ZHANG C. Elasto-dynamics of internal gear planetary transmissions [J]. Mechanism and Machine Theory, 2005, 40 (10):1107-1125.
  • 7SHU X L . Determination of load sharing factor for planetary gearing with small tooth number difference[J]. Mechanism and Machine Theory, 1995, 30 ( 2 ): 313-321.
  • 8BONORI G, BARBIERI M, PELLICANO F. Optimum profile modifications of spur gears by means of genetic algorithms [J]. Journal of Sound and Vibration, 2008, 313(3/5):603-616.
  • 9LI S T. Finite element analyses for contact strength and bending strength of a pair of spur gears with machining errors, assembly errors and tooth modifications [J]. Mechanism and Machine Theory, 2007, 42 ( 1 ): 88-114.
  • 10LI S T. Deformation and bending stress analysis of a three-dimensional thin rimmed gear[J]. ASME Journal of Mechanical Design, 2002, 124:129-135.

引证文献2

二级引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部