期刊文献+
任意字段
题名或关键词
题名
关键词
文摘
作者
第一作者
机构
刊名
分类号
参考文献
作者简介
基金资助
栏目信息

功率因数校正技术在逆变焊机中的应用 被引量：3

Summarization of power factor correction technology in inverter welding power supply
下载PDF
导出
摘要 对现有的功率因数校正(PFC)技术在逆变焊机中的应用情况进行了分析和比较,其电路拓扑分别以单相PFC和三相PFC进行阐述。其中单相PFC包含了BUCK降压型PFC电路拓扑、BOOST升压型PFC电路拓扑、升降压型PFC电路拓扑以及单级单相PFC电路拓扑。三相PFC包含直接并联三相PFC电路拓扑、单开关三相PFC电路拓扑、三开关三相PFC电路拓扑、六开关三相PFC电路拓扑以及三相单级PFC电路拓扑。最后概括了功率因数校正技术在逆变焊机中应用的发展趋势。 The application of power factor correction（PFC）technologies were analyzed and compared.The circuit topology of PFC was divided into two domains, one is single-phase PFC the other is three-phase PFC.There are BUCK PFC circuit topology,BOOST PFC circuit topology,BUCK-BOOST PFC circuit topology and single-stage PFC circuit topology in single-phase PFC.Three-phase PFC includes directly connect three-phase PFC circuit topology,single switch three-phase PFC circuit topology, three switches three-phase PFC circuit topology.six switches three-phase PFC circuit topology and single-stage three-phase PFC circuit topology.At the end of this paper,it summarizes the trends of PFC technology in inverter welding supply.
作者 丁坤 姚河清 范兴辉 王守艳
机构地区 河海大学机电工程学院
出处 《电焊机》 2008年第9期90-93,共4页 Electric Welding Machine
基金 河海大学常州校区创新科技基金资助项目(CC2007-01)
关键词 功率因数校正 逆变焊机 电路拓扑 power factor correction inverter welding supply circuit topology
分类号 TG456 [金属学及工艺—焊接]
  • 相关文献

参考文献22

  • 1吴文楷,朱志明,罗小锋,张人豪.逆变焊机功率因数的分析与校正[J].电焊机,1998,28(5):18-20. 被引量：7
  • 2Larry L Church, William T Matthews.Electric arc welding and plasma cutter. US0061776d5B1[P].Jan,23,2001.
  • 3吕东波,王志强.逆变式弧焊电源软开关APFC装置的研制[J].电焊机,2000,30(3):6-8. 被引量：4
  • 4Bernard Vogel ,Steven Geissler.Auxiliary open circuit voltage power supply.US005991180A[P].Nov.23,1999.
  • 5Steven Geissler, Little Chute.Power convertor with low loss switching.US006865096B 1 [P].Mar.8,2005.
  • 6Steven J Geissler,Linle Chute.Method and apparatus for receiving a universal input voltage in a welding, plasma or heating power source.US006987242B1[P].Jan.17,2006.
  • 7Pollock H,Flower J O.New method of power control for series-parallel load-resonant converters maintaining zerocurrent switching and unity power factor operation[J].Power Electronics IEEE Transactions on, 1997,12(1): 103-115.
  • 8Chae Y M,Gho J S,Choe G H,et al.PWM converter-inverter arc welding machine using new type NCT[A].Power Electronics Specialists Conference[C].PESC 98 Record.29th Annual IEEE, 1998 : 1636-1641.
  • 9Todd Eric Kooken, Lyndhurst,Ohio.Arc welding power supply.US005991169[P], Nov.23,1999.
  • 10Borka J, Horvath M.A new simple low-cost modular arrangement of high power factor for both DC and AC welding[A]. Industrial Electronics[C], 1999.ISIE '99.Proceedings of the IEEE International Symposium on, Volume 2,1999:757-761.

二级参考文献23

  • 1朱志明,张人豪.逆变式弧焊电源的功率因数及其提高途径[J].电焊机,1996,26(4):5-8. 被引量：5
  • 2陈树君.弧焊逆变电源的软开关变换及谐波抑制的研究：博士论文[M].哈尔滨:哈尔滨工业大学,1999..
  • 3陈树君.弧焊逆变电源的软开关变换及谐波抑制的研究[D].哈尔滨工业大学[博士学位论文],1999.
  • 4Satoshi Ogasawara. A novel control scheme of a parallel current PWM inrerter[ J]. IEEE Trans. on Ind. Application, 1992,28 ( 5 ) :1023 - 1030.
  • 5Yi-Hwa Liu, Chern-Lin Chen. Anovel space-vector current regulation scheme for a field - oriented-controlled induction motor drive[ J]. IEEE Trans. on Ind. Electronics, 1998,45 ( 5 ) :730 - 737.
  • 6Hasan Komurcugil, Osmam Kukrer. A novel current - contrel method for three- phase PWM AC/DC voltage -source converters[ J].IEEE Trans. on Ind. Electronics, 1997,44 (3) :544 - 553.
  • 7Hengchun Mao. Review of high-performance three-phase powerfactor correction circuits [ J ]. IEEE Trans. on Ind. Application. ,1997,44 ( 3 ) :437 - 446.
  • 8陈树君，博士学位论文，1999年
  • 9张崇巍 张兴.PWM整流器及控制[M].北京:机械工业出版社,2003..
  • 101，JamesP.noon,UC3855A/BHighPerformancePowerFacterPreregulatorUNITRODECORPORATIONNewProductApplicationsEngineer

共引文献20

同被引文献13

  • 1王久和,李华德.一种新的电压型PWM整流器直接功率控制策略[J].中国电机工程学报,2005,25(16):47-52. 被引量：125
  • 2王久和,李华德,王立明.电压型PWM整流器直接功率控制系统[J].中国电机工程学报,2006,26(18):54-60. 被引量：157
  • 3Ooi B T,Salmon J C,Dixon J W,et al. A three phase con- trolled current PWM converter with leading power factor[J]. IEEE Trans lnd Appl, 1987(IA-23 ) :78-84.
  • 4Wu R,Dewan S B,Slemon G B. A PWM AC-to-DC con- verter with fixed switching frequency[J]. IEEE Trans Ind Appl, 1990( 26 ) : 880-885.
  • 5Zhong Q C,Weiss G. Static synchronous generators for distributed generation and renewable energy[C].Power Sys- tems Conference and Exposition,2009. PSCE'09. IEEE/PES. IEEE, 2009 : 1-6.
  • 6Zhong Q C,Weiss G. Synchronverters:Inverters that mimic synchronous generators[J]. Industrial Electronics, IEEE Tra- nsactions on,2011,58(4) : 1259-1267.
  • 7Ma Z Y,Zhong Q C,Yan J D. Synchronverter-based Control Strategies for Three-phase PWM Rectifiers[C]. Proc. Of the 7 the IEEE Conference on Industrial Electronics and App- lications( ICIEA ), Singapore, Jul. 2012 : 225-230.
  • 8Zhong Q C,Ma Z Y,Phi-long Nguyen. PWM-controlled Rectifiers without the Need of an Extra Synchronisation Unit[C]. Iecon-annual Conference on IEEE Industrial Ele- ctronics Society. IEEE, 2012 : 691-695.
  • 9普利斯曼,碧利斯/莫瑞.开关电源设计[M].王志强,译.北京:电子工业出版社,2010.
  • 10王鹏涛.探讨功率因数及功率因数的提高[J].科技信息,2010(09X):95-95. 被引量：4

引证文献3

二级引证文献5

电焊机
2008年 第9期

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部