期刊文献+

Strain Limit of Extra Galvannealed Interstitial-Free and Bake Hardened Steel Sheets Under Different Stress Conditions 被引量:2

Strain Limit of Extra Galvannealed Interstitial-Free and Bake Hardened Steel Sheets Under Different Stress Conditions
原文传递
导出
摘要 The formability of bake hardened steel (thickness 0.82 mm), and the extra galvannealed IF steel (thickness 0.82 mm) have been studied. The suitability of the above steels for forming applications has been critically examined. The microstructure, tensile properties, and formability parameters of the above sheet metals were determined. The manufacturing process of the steels and the significance with reference to its formability were studied. The formability of bake hardened steel (thickness 0.82 mm), and the extra galvannealed IF steel (thickness 0.82 mm) have been studied. The suitability of the above steels for forming applications has been critically examined. The microstructure, tensile properties, and formability parameters of the above sheet metals were determined. The manufacturing process of the steels and the significance with reference to its formability were studied.
出处 《Journal of Iron and Steel Research International》 SCIE EI CAS CSCD 2008年第5期56-60,共5页
关键词 bake hardened steel extra galvannealed IF steel microstructure forming limit diagram tensile parameter bake hardened steel extra galvannealed IF steel microstructure forming limit diagram tensile parameter
  • 相关文献

参考文献10

  • 1Keeler S P.Determination of Forming Li mits in Automative Stampings[].Sheet Metal Industries.1965
  • 2Goodwin G M.Application of Strain Analysis to Sheet Metal Forming Problems in the Press Shop[].Metall Italiana.1968
  • 3Hecker S S.Si mple Technique for Determining Forming Li mit Curves[].Sheet Metal Industries.1975
  • 4Banabic D.Li mit Strainsinthe Sheet Metals by Usingthe 1993 Hill′s Yield Criterion[].Journal of Materials Processing Technology.1999
  • 5Sing W M,Rao K P.Role of Strain-Hardening Laws in the Prediction of Forming Li mit Curves[].Journal of Materials Processing Technology.1997
  • 6Cada R.Comparison of Formability of Steel Strips,Which Are Used for Deep Drawing of Stampings[].Journal of Materials Processing Technology.1996
  • 7Chow C L,Jie M.Forming Li mits of AL 6022 Sheets With Material Damage Consideration—Theory and Experi mental Validation[].International Journal of Mechanical Sciences.2004
  • 8Ravi Kumar D.Formability Analysis of Extra-Deep Drawing Steel[].Journal of Materials Processing Technology.2002
  • 9K. P. Rao and W. M. Sing.On the prediction of the effect of process parameters upon forming limit strains in sheet metals[].International Journal of Mechanical Sciences.2000
  • 10Takuda H,Mori K,Takakura N,et al.The application ofsome criteria for ductile fracture to the prediction of the form-ing limit of sheet metals[].Journal of Materials Processing Technology.1999

同被引文献7

引证文献2

二级引证文献4

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部