期刊文献+

复合砌块传热研究 被引量:3

Research on heat transfer of compound blocks
下载PDF
导出
摘要 采用实验测定与理论计算相结合的方法,对砌块的传热问题进行初步研究,并通过计算补充了修正系数,弥补了"平均法"中修正系数范围较小,不能满足当前新型建筑构件的不足。 Preliminary research is made on heat transfer of compound block by combination of experimental test and theoretical calculation. The coefficient of correction is replenished after calculation, and compensated the shortage of small scope of correction coefficient in the "average method" that can not satisfy the current new building components.
出处 《新型建筑材料》 北大核心 2008年第9期62-65,共4页 New Building Materials
关键词 复合砌块 传热 热桥 compound block heat transfer heat bridge
  • 相关文献

参考文献3

  • 1Mohsen, Mousa S. Some prospects of energy savings in buildings[J]. Energy Conversion and Management, 2001,42:1307-1315.
  • 2Borse G J. Numerical Methods with Matlab[M].PWS Boston, 1997.
  • 3贺平,孙刚.工程热力学[M].北京:中国建筑工业出版社,1996:13-14.

同被引文献34

  • 1李红梅,金伟良,叶甲淳,王有为.建筑围护结构的温度场数值模拟[J].建筑结构学报,2004,25(6):93-98. 被引量:41
  • 2冉茂宇.非均质围护结构传热系数的简化计算及检测方法[J].建筑科学,2007,23(3):26-30. 被引量:13
  • 3Mohsen M S. Some prospects of energy saving in building[J]. Energy Conversion and Management ,2001,42:1307-1315.
  • 4GB50176-93,民用建筑热工计算规范[S].
  • 5Tadeusz S, Nakasone Y, Yoshimoto S. Engineering analysis with ANSYS software [ M ]. Butterworth-Heinemann,2007.
  • 6GB50019-93,采暖通风与空气调节设计规范[S].
  • 7JGJ134-2001.夏热冬冷地区居住建筑节能设计标准[S].[S].,..
  • 8Huang Z J,Zhang T, Zhang Y,et al.Field measurements and analyses of energy consumption of residential building in Ma'an shan city [C]//THE 7th INTERNATIONAL SYMPOSIUM ON HEATING, VENTILATING AND AIR CONDITIONING, 2011,4: 1130-1135.
  • 9Zhu P, Huckemann V, Fisch M N.The optimum thickness and energy saving potential of external wall insulation in different climate zones of China [J].Procedia Engineering, 2011,21: 608- 616.
  • 10Dombayci O A, Golcu M, Pancar Y.Optimization of in sulation thickness for external walls using different energy-sources [J]. Applied Energy, 2006, 83: 921-928.

引证文献3

二级引证文献8

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部