摘要
利用FANUC-0MD系统实现了塑窗型材柔性锯铣加工中心数控系统的开发。在分析了锯铣加工中心的功能、加工工艺以及控制要求的基础上,利用FANUC-0MD通用数控系统进行了二次开发,实现了锯铣加工中心的数控化,开发工作包括机床原点设置、伺服控制系统和流程控制功能的设计。实验结果表明加工中心达到了控制要求。
Using FANUC--0MD system, the control system accorded with requirements of the sawing and milling machining center for plastic door and window PVC profile was accomplished. Based on researches of the structure, the function, the technologies and the control requirements of the machining center,a CNC system of the machining center had implemented,including the machine tool origin set- up and the functions of the servo control system and auxiliary control system. By simulation experiments, it is shown that the control requirements of the machining center are achieved.
出处
《中国机械工程》
EI
CAS
CSCD
北大核心
2008年第16期1962-1965,共4页
China Mechanical Engineering
基金
教育部科学技术研究重点项目(206088)
山东省重点学科基金资助项目(XTB0713)