期刊文献+

边界层风洞主动模拟装置的研制及实验研究 被引量:5

Development and experimental study on the active simulation device in boundary layer wind tunnel
下载PDF
导出
摘要 研制可控振动尖劈在风洞中模拟湍流边界层,寻找一种简易可行的运动控制结构和方法,试验结果证明了尖劈的低频机械振动增强了相应频率的湍流能量,增大了湍流积分长度。 A controllable spire device has been developed for boundary layer simulation in wind tunnel. The feasibility and control program of the mechanism have been investigated. Experimental results have demonstrated the mechanical vibration of the spires in a certain frequency will enhance simulated turbulence energy around corresponding frequency point, and increase the integral length of turbulence.
出处 《实验流体力学》 EI CAS CSCD 北大核心 2008年第3期80-85,共6页 Journal of Experiments in Fluid Mechanics
基金 国家自然科学基金项目(90715031)
关键词 主动模拟 边界层风洞 功率谱密度 湍流积分长度 active simulation boundary layer wind tunnel power density spectra integral length of turbulence
  • 相关文献

参考文献6

  • 1庞加斌,林志兴,陆烨.关于风洞中用尖劈和粗糙元模拟大气边界层的讨论[J].流体力学实验与测量,2004,18(2):32-37. 被引量:26
  • 2CERMARK J E. Progress in physical Modeling for wind engineering[ J ] . J. Wind Eng. Ind. Aerodyn. , 1995,54/55 : 439- 455.
  • 3NISHI A, KIKUGAWA H, MATSUDA Y, et al. Turbulence control in multiple-fan wind tunnels [ J ]. J. Wind Eng. Ind. Aerodyn., 1997,67&68:861-872.
  • 4CAO S Y, NISHI A, KIKUGAWA H, et al. Reproduction of wind velocity history in a multiple fan wind tunnel[J] .J. Wind Eng. Ind. Aerodyn. , 2002,90 : 1719-1729.
  • 5陈凯,毕卫涛,魏庆鼎.振动尖塔对风洞模拟大气湍流边界层的作用[J].空气动力学学报,2003,21(2):211-217. 被引量:9
  • 6COGOTTI A. Unsteady aerodynamics at pinifarnia: road turbulence simulation and time-dependent techniques [ C ] //The 5th International Symposium on Automotive and Engine Technology. Stuttgart, Germany, Expert verlag, 2003.

二级参考文献19

  • 1施宗城.中性大气边界层模拟试验调试方法研究[J].同济大学学报(自然科学版),1994,22(4):469-480. 被引量:12
  • 2项海帆 林志兴 等.公路桥梁抗风设计指南[M].北京:人民交通出版社,1996.52-55.
  • 3颜大椿.大气边界层模拟的湍流相似[J].力学进展,1986,16:473-481.
  • 4[1]CAMPBELL G S, STANDEN N M. Simulation of earth's surface winds by artificially thickened wind tunnel boundary layers[R]. Progress Report Ⅱ, National Research Council of Canada, NAE Rep., LTR-LA-37(July 1969).
  • 5[2]COUNIHAN J. Adiabatic atmospheric boundary layer: a review and analysis of data from the period 1880-1972 [J]. Atmospheric Environment, 1975, (9): 871 ~ 905.
  • 6[3]IRWIN H P R A. The design of spires for wind simulation [J]. Journal of Wind Engineering and Industrial Aerodynamics, 1981, (7) :361 ~ 366.
  • 7[4]SILL B L. Turbulent boundary layer profiles over uniform rough surfaces [J]. Journal of Wind Engineering and Industrial Aerodynamics, 1988, (31): 147 ~ 163.
  • 8[5]FANG C, SILL B L. Aerodynamic roughness length: correlation with roughness elements [J]. Journal of Wind Engineering and Industrial Aerodynamics. 1992, (41-44) :449 ~ 460.
  • 9[6]JIA Y Q, SILL B L. REINHOLD T A. Effects of surface roughness element spacing on boundary-layer velocity profile parameters [J]. Journal of Wind Engineering and Industrial Aerodynamics. 1998, (73) :215 ~ 230.
  • 10[7]PANOFSKY H A, DUTTON J A. Atmospheric turbulence [M]. John Willy & Sons, NY 1984.

共引文献26

同被引文献48

引证文献5

二级引证文献7

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部