期刊文献+

现场大尺寸测量量值溯源 被引量:12

Quantity Traceability in Large-Scale Measurement in Situ
下载PDF
导出
摘要 为了评价大尺寸测量量值的准确性,需要建立大尺寸测量的量值溯源体系.针对研究的大尺寸配对视觉测量网的溯源难题,以激光跟踪仪作为高精度标准仪器,利用四元数空间配准算法将所有视觉传感器测量值统一到激光跟踪仪坐标系下,对其测量值现场原位溯源,并通过空间性能评价实验对激光跟踪仪溯源.实验表明,激光跟踪仪的不确定度为10μm+0.8μm/m,配对式视觉测量网的不确定度优于0.2 mm.应用本文的方法可现场快速对多数大尺寸测量仪器溯源,研制的配对式视觉测量网络满足多数大尺寸测量任务. The quantity traceability system is often established to evaluate the accuracy of large-scale measurement. It is difficult to trace back to the source based on large-scale pairing vision measurement net. So quaternion spatial registration algorithm is used to transform the measure values of all vision sensors to laser tracker coordinate system with high precision standard, and finally these values are traced in situ. Besides,the laser tracker is also traced by spatial ability estimation experiments. The corresponding experimental results show that the uncertainty of laser tracker is 10 μm+0.8 μm/m, while the uncertainty of pairing vision measurement net exceeds 0.2 mm. The method can trace back to the field source for most large-scale devices quickly, and the corresponding pairing vision measurement net can satisfy plenty of large-scale measurement tasks.
出处 《天津大学学报》 EI CAS CSCD 北大核心 2008年第10期1167-1171,共5页 Journal of Tianjin University(Science and Technology)
基金 国家自然科学基金资助项目(50575158 60723004) 高等学校博士学科点专项科研基金资助项目(20060056015)
关键词 大尺寸测量 量值溯源 激光跟踪仪 不确定度 large-scale measurement quantity traceability laser tracker uncertainty
  • 相关文献

参考文献10

  • 1Sun Junhua, Zhang Guangjun, Wei Zhenzhong. Large 3D free surface measurement using a mobile coded light- based stereo vision system [J]. Sensor and Actuators A : Physical, 2006, 132 ( 2 ) : 460-471.
  • 2刘彦,谭久彬,王雷.差动电磁作动器的超大型光学仪器隔振基础的主动控制机理[J].光学精密工程,2007,15(10):1602-1608. 被引量:7
  • 3齐永岳,赵美蓉,林玉池.提高激光干涉测量系统精度的方法与途径[J].天津大学学报,2006,39(8):989-993. 被引量:15
  • 4Maurice G C,Bernd R L S. The use of a Monte Carlo method for evaluating uncertainty and expanded uncertainty [ J ]. Metrologia, 2006,43 ( 4 ) : S 178-S 188.
  • 5Trapet E, Savio E, De Chiffre L. New advances in traceability of CMMs for almost the entire range of industrial dimensional metrology needs[J]. CIRP Annals: Manufacturing Technology, 2004, 53 ( 1 ) : 433- 438.
  • 6Kenta Umetsu, Ryosyu Furutnani, Sonko Osawa, et al. Geometric calibration of a coordinate measuring machine using a laser tracking system [J] . Measurement Science and Technology, 2005, 16: 2466-2472.
  • 7Ma Liqun, Wang Liding, Cao Tieze, et al. A large-scale laser plane calibration system [J]. Measurement Science and Technology, 2007, 18 : 1768-1772.
  • 8邾继贵,王仲,周富强,吴斌,叶声华.IVECO车身视觉检测系统现场溯源研究[J].计量学报,2000,21(1):28-33. 被引量:15
  • 9郑荣才,陈超英,杨功流.大型舰船甲板变形测量[J].天津大学学报,2006,39(9):1077-1081. 被引量:8
  • 10ASME B89.4.19 Performance Evaluation of Laser Based Spherical Coordinate Measurement Systems [S]. American Society of Mechanical Engineers, 2005.

二级参考文献24

共引文献41

同被引文献98

引证文献12

二级引证文献153

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部