期刊文献+

一种改进FDTD仿真准确性的等效宽度技术

An Improved Accurate FDTD Simulation Technique Using Relatively Coarse Mesh
下载PDF
导出
摘要 提出了一种改进FDTD(Finite Difference Time Domain)仿真结果的等效宽度技术,它通过对仿真对象的尺寸进行加权修正,即使在使用粗网格进行FDTD仿真时也能得到准确的结果.同时对FDTD仿真时节省运算时间和存储空间也具有非常实用的价值.并通过对均匀微带线的特性阻抗和贴片天线、低通滤波器的散射系数的计算验证了这一理论. In this paper, a fast convergent technique was presented. An improved accurate FDTD ( Finite Difference Time Domain) simulation result could be generated using a relatively coarse mesh for PEC planar structures if an effec- tive factor is properly selected. It is very valuable because the calculating time and space could be decreased when FDTD simulation is done. A microwave patch antenna and a low pass filter were used in this paper to verify the proposed scheme.
出处 《南京师范大学学报(工程技术版)》 CAS 2008年第3期6-10,共5页 Journal of Nanjing Normal University(Engineering and Technology Edition)
基金 南京师范大学"211"学科建设基金(1843202529)资助项目
关键词 FDTD仿真 理想导体 均匀微带线 FDTD simulation, PEC, uniform microwave stripline
  • 相关文献

参考文献6

  • 1[1]Yee K 5.Numerical selution of initial boundary value problems involving maxwell's equations in isotropie media[J].IEEE Transactions on Antennas and Propagation,1966,14 (5):302-307.
  • 2[2]Kunz K S,Raymond J,Luebbers.The Finite Difference Time Domain Method for Electromagnetics[M].Boca Roton:CRC Press LLC,1993.
  • 3[3]Allen Taflove.Computational Eletromagnetics The Finite-Difference Time-Domain Method[M].Norwood MA:Artech House,1995.
  • 4[5]Sheen D M,Ali S M,Abouzahra M D,et al.Application of the three dimensional finite-difference time-domain method to the analysis of planar microstrip circuits[J].IEEE Transactions on Microwave Theory and Techniques,1990,38 (7):849-857.
  • 5[6]David Pozar.Microwave Engineering[M].2nd ed.New York:John Wiley and Sons lne,1998:162.
  • 6[7]Mur G.Absorbing boundary conditions for the finite-difference approximation of the time-domain electromagnetic field equations[J].IEEE Trans Electromagnetic Compatibility,1981,23(3):377-382.

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部