期刊文献+

自紧球形容器内残余应力的弹塑性研究 被引量:2

Elasto-plastic Analysis of Residual Stress in Autofrettage Sphere Vessel
下载PDF
导出
摘要 根据材料的不可压缩性假设,研究了线性强化材料球形容器的弹塑性加卸载过程。通过把材料的包辛格系数考虑为等效塑性应变的函数,建立起了等向硬化、随动硬化和混合硬化模型下的自紧厚壁球壳的残余应力公式。算例分析表明包辛格效应对自紧残余应力有较大的影响,最后还通过计算研究了球形容器内残余应力在不同自紧度下的分布情况。 Under the incompressible hypothesis of material, the elasto-plastic loading and unloading for thick-walled sphere shell of linear hardening material are investigated. Considering Bauschinger effect coefficient as the function of equivalent plastic strain, the formulas of residual stress in autofrettage thick-walled sphere shell are derived following the material of isotropic hardening, kinematic hardening and mixed hardening models. The Analysis of examples show that Bauschinger effect obviously exerts influence on the autofrettage residual stress, and the distribution of residual stress in sphere vessel is discussed under different autofrettage degrees by numerical calculation.
机构地区 南京理工大学
出处 《应用力学学报》 EI CAS CSCD 北大核心 2008年第3期512-515,共4页 Chinese Journal of Applied Mechanics
关键词 包辛格效应 球形容器 自紧分析 残余应力 bauschinger effect, sphere vessel, autofrettage analysis, residual stress.
  • 相关文献

参考文献7

二级参考文献16

  • 1阮澍铭,张泽华,付在春,邓华.拉压屈服强度不同材料的厚壁球壳的极限分析[J].力学与实践,1995,17(4):31-33. 被引量:19
  • 2冯西桥,刘信声.拉压性能不同对厚壁圆筒安定性的影响[J].力学与实践,1995,17(5):28-30. 被引量:21
  • 3战人瑞,陶春达.自增强设备最佳超应变度研究[J].石油学报,1996,17(4):128-136. 被引量:11
  • 4化工设备设计全书编辑委员会.超高压容器设计[M].上海:上海科学技术出版社,1983..
  • 5Theocaris PS. A general yield criterion for engineering materials depending on void growth. Mechanica, 1986, 21(1):91~105
  • 6范钦珊.材料力学.北京:高等教育出版社,2000(Fan Qinshan. Mechanics of Materials. Beijing: Higher Education Press, 2000 (in Chinese))
  • 7徐秉业,刘信声.应用弹塑性力学.北京:清华大学出版社,1995(Xu Bingye, Liu Xinsheng. Applied Elasto-Plastic Mechanics. Beijing: Qinhua University Press, 1995 (in Chinese))
  • 8任安峰,强化材料液压自紧圆筒残余应力计算和强度计算,1986年,25页
  • 9才鸿年,强度设计及自紧工艺设计的若干问题,1981年,16页
  • 10NeuberHZ 赵旭生 译.应力集中[M].北京:科学出版社,1958.125.

共引文献20

同被引文献14

  • 1沈军,谢怀勤,侯涤洋.纤维缠绕聚合物基复合材料压力容器的可靠性设计[J].复合材料学报,2006,23(4):124-128. 被引量:20
  • 2Chen Hungwen, Sun Huaiku, Liu Tienchih. Autofrettage analysis of a fibre-reinforced composite tube structure incorporated with a SMA [J]. Composite Structures, 2009, 89(4) : 497-508.
  • 3Jahromi B H, Farrahi G H, Maleki M. Residual stresses in autofrettaged vessel made of functionally graded material [J]. Engineering Structures, 2009, 31(12): 2930-2935.
  • 4Salzar R S. Influence of autofrettage on metal matrix composite reinforced gun barrels [J]. Composites Part B, 1999, 30(8):841-847.
  • 5Hu J, Chandrashekhara K. Fracture analysis of hydrogen storage composite cylinders with liner crack accounting for autofrettage effect[J]. International Journal of Hydrogen Energy, 2009, 34(8): 3425- 3435.
  • 6Kim C H, Park J H, Kim C, Choi J C. Expert system for process planning of pressure vessel fabrication by deep drawing and ironing [J]. Journal of Materials Processing Technology, 2004, 155/156(30): 1465-1473.
  • 7Alegre J M, Bravo P, Preciado M. Fatigue behavior of an autofrettaged high-pressure vessel for the food industry [J]. Engineering Failure Analysis, 2007, 14(2): 396-407.
  • 8朱务学 查子初.自增强厚壁球壳的应力应变分析.固体力学学报,1987,8(1):60-64.
  • 9马景槐.线性强化材料厚壁球壳的统一自增强分析[J].江苏技术师范学院学报,2007,13(6):1-5. 被引量:1
  • 10张传勇,万晓宁,张建伟.采用有限元法计算CNG2型气瓶自紧压力[J].压力容器,2008,25(4):21-23. 被引量:13

引证文献2

二级引证文献11

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部