期刊文献+

Preparation and characterization of Ni-P hollow material based on the shape of Nocadia

Preparation and characterization of Ni-P hollow material based on the shape of Nocadia
原文传递
导出
摘要 A new type Ni-P hollow material with rod-shape is prepared by electroless deposition method and heat treatment based on the shape of Nocadia, a kind of bacteria. The material is characterized and its magnetic, electromagnetic and mechanical properties are measured. It is found that the Ni-P coating transforms from a disordered structure before hollowing to an ordered arrangement of face centered cubic (FCC) Ni after hollowing at 673 K and body centered tetragonal Ni3P occurs. After hollowing no change of the surface morphology has been found. But the cytoplasm disappears and the Ni-P layer becomes more compact. A new type hollow material with shell thickness of 150―200 nm is obtained. The saturation magnetization (Ms), remanent magnetization (Mr) and coercivity (Hc) are enhanced to 20 emu/g, 2.7 emu/g and 117.5 Oe, respectively. The dielectric and magnetic loss are improved to 14 and 0.4, respectively. The hardness and the elastic modulus are raised to 1.80 GPa and 23.79 GPa, respectively. All show great improvement compared with those before hollowing. A new type Ni-P hollow material with rod-shape is prepared by electroless deposition method and heat treatment based on the shape of Nocadia, a kind of bacteria. The material is characterized and its magnetic, electromagnetic and mechanical properties are measured. It is found that the Ni-P coating transforms from a disordered structure before hollowing to an ordered arrangement of face centered cubic (FCC) Ni after hollowing at 673 K and body centered tetragonal Ni3P occurs. After hollowing no change of the surface morphology has been found. But the cytoplasm disappears and the Ni-P layer becomes more compact. A new type hollow material with shell thickness of 150-200 nm is obtained. The saturation magnetization (Ms), remanent magnetization (Mr) and coercivity (Hc) are enhanced to 20 emu/g, 2.7 emu/g and 117.5Oe, respectively. The dielectric and magnetic loss are improved to 14 and 0.4, respectively. The hardness and the elastic modulus are raised to 1.80 GPa and 23.79 GPa, respectively. All show great improvement compared with those before hollowing.
出处 《Chinese Science Bulletin》 SCIE EI CAS 2008年第20期3235-3239,共5页
基金 the National Natural Science Foundation of China (Grant No. 50571003)
关键词 镍-磷空心材料 磁性 绝缘体 力学性质 Ni-P hollow material, magnetic properties, dielectrics, mechanical properties
  • 相关文献

参考文献1

二级参考文献15

  • 1Zhang D Y,Li Y Q.In:Yang H Y,Li W,eds.,4th Int Conf on Frontiers of Design and Manufacturing,Beijing:International Academic Publishers,2000:17
  • 2Sleytr U B,Messner P,Sara M,Pum D.Syst Appl Microb.1986;7:301
  • 3Shenton W,Pum D,Sleytr U B,Mann S.Nature,1997:389:585
  • 4Whaley S R,English D S,Hu E L,Barbara P F.Belcher A M.Nature.2000;405:665
  • 5Lee S W,Mao C B,Flynn C E,Belcher A M.Science.2002;296:892
  • 6Matsui H,Gologan B.J Phys Chem,2000;104B:3383
  • 7Matsui H,MacCuspie R.Nano Lett,2001:1:671
  • 8Matsui H,Porrata P,Douberly G E.Nano Lett.2001:1:461
  • 9Li X F,Li Y Q,Cai J,Zhang D Y.Sci Chin,2003;46E:161
  • 10Cai J,Li Y Q,Li X F,Zhang D Y.J Magn Magn Mater.2002;246:36

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部