摘要
通过分析ISO/IEC 7816-3传输协议,设计该符合协议标准的接触式智能卡控制器,实现对字符传输和块传输这两种不同传输方式的智能卡的支持。该控制器集成于基于AMBA总线的Garfield系列芯片SEP4020中,采用硬件描述语言(verilog)实现。利用EDA工具VCS,Design Compiler对该控制器进行仿真、综合。设计采用Altera公司的FPGA进行验证,并采用SMIC 0.18μm工艺流片成功。在阐述该控制器设计原理的基础上,进行模块划分和具体设计,最后给出仿真、综合和FPGA验证结果。
By analyzing ISO/IEC 7816- 3 transmission protocol, the smart card controller is designed to conform to the protocol. This controller takes the basic control Of the smart card,and is capable of supporting two different modes of transmission： both character and block transmission. It is integrated in the Garfield SEP4020 chip which is based on AMBA bus,and implemented by the hardware description language （Verilog）. The simulation and synthesis process is conducted by VCS and Design Compiler. After being verified in Altera FGPA,the design is successfully taped out by the SMIC 0.18 μm procedure. This thesis sets out to explain the design principles, module partition, detailed design, and the results of synthesis and verification is provided in the end.
出处
《现代电子技术》
2008年第20期35-38,共4页
Modern Electronics Technique
