摘要
通过对浸酸山羊皮进行鞣制,确定了3种氧化乳糖-金属鞣性模块鞣制最优条件,即ω(Ot-Cr(III))为8%,ω(Ot-Al(III))与ω(Ot-Cu(II))为12%;鞣制pH为3.8;鞣制温度40℃。各鞣性模块单独鞣制时,物理机械性能基本满足山羊服装革的行业要求。
The optimum tanning processes of three kinds of oxidized lactose-metal Tanning Matrices were determined by tanning pickled goat skins. It＇s clear that ω （Ot-Cr（Ⅲ）） is 8%, ω （Ot-Al （Ⅲ）） and ω（Ot-Cu（Ⅱ）） are 12%, respectively, can produce high shrinkage temperature of leather under pH 3.5, tanning temperature 40 ℃. The physical-mechanical properties of tanned goat garment leather can meet the demands of industry standard.
出处
《皮革科学与工程》
CAS
2008年第5期5-7,17,共4页
Leather Science and Engineering
基金
四川大学校青年科研基金资助(NO.07026)
关键词
鞣性模块
氧化乳糖-金属
鞣制
Tanning Matrices
oxidized lactose-metal
tanning
