期刊文献+

聚硅酸镁在印染废水处理中的应用 被引量:9

Application of polymerized silicate containing magnesium chloride to wastewater treatment
下载PDF
导出
摘要 以聚硅酸镁为絮凝剂,粉煤灰为助凝剂处理印染废水。研究了该复合絮凝体系处理废水的最佳工艺条件,如聚硅酸镁投加量、Mg/Si摩尔比、粉煤灰加入量、沉降时间、废水酸度。处理结果表明,该复合絮凝体系在碱性条件下处理效果较好,Mg/Si摩尔比为1.36时,对废水的CODCr去除率达53%,色度去除率达94%以上,优于聚合氯化铝处理效果。 Wastewater treatment using polymerized silicate containing magnesium as flocculant and fly ash as coagulated aids was studied. The optimal treatment conditions with this combined flocculant system were investigated, such as flocculant dosage, Mg/Si mole ratio, fly ash dosage, settling time, acidity of wastewater. The results showed that under alkaline system, the combined flocculant with the ratio of Mg to Si 1.36 could effectively remove 53% CODcr and more than 94% color, which was superior to PAC.
出处 《印染》 北大核心 2008年第20期33-35,共3页 China Dyeing and Finishing
基金 上海市重点学科建设项目(P1304)
关键词 染整 废水处理 絮凝剂 聚硅酸镁 dyeing and finishing wastewater treatment flocculant polymerized silicate containing magnesium
  • 相关文献

参考文献4

二级参考文献26

共引文献395

同被引文献105

引证文献9

二级引证文献44

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部