期刊文献+

在线液体颗粒计数器校准方法研究 被引量:2

Research on Calibration Method of On-line Particle Counter for the Liquid
下载PDF
导出
摘要 在线液体颗粒计数器在液压润滑系统的污染控制中获得广泛应用,但是,这些仪器在采用传统方法校准时出现了困难。为此,笔者研究并设计了在线液体颗粒计数器的校准方案,解决了大颗粒尺寸校准误差大和微流量取样时流量不稳定的问题,分析了校准结果的测量不确定度,得出了在线液体颗粒计数器的校准方法。 The on-line particle counter for the liquid is widely used in the contamination control of a hydraulic and lubricating system. However, it's difficult that the instruments are calibrated by the traditional methods. Calibration project for the on-line particle counter for the liquid was designed, and the problems that the error is large when the big particle sizes are calibrated and the flow is unsteady when tiny flow is sampled were resolved, and uncertainty of the calibration result was analyzed, and the calibration method of the on-line particle counter for the liquid was got.
作者 郝新友
出处 《机床与液压》 北大核心 2008年第10期85-87,94,共4页 Machine Tool & Hydraulics
关键词 在线液体颗粒计数器 校准 污染控制 On-line particle counter for the liquid Calibration Contamination control
  • 相关文献

参考文献4

  • 1郝新友,马书根,曹建军,袁新豪.怎样用好液体自动颗粒计数器[J].液压与气动,2003,27(3):39-42. 被引量:12
  • 2ISO11943, Hydraulic fluid power- On-line automatic particle-counting systems for liquids Methods of calibration and validation [S].
  • 3ISO/TR16144, Hydraulic fluid power Calibration of liquid automatic particle counters Procedures used to certify the standard reference material SRM2806 [S].
  • 4ISO11171, Hydraulic fluid power Calibration of liquid automatic particle counters [S].

二级参考文献1

共引文献11

同被引文献12

  • 1ISO21501-3, Determination of particle size distribution-Single particle light interaction methods-Part 3 : Light extinction liq- uid-borne particle counter [ S].
  • 2ASTM F658, Standard practices for defining size calibration, resolution, and counting accuracy of a liquid-borne particle counter using near-monodisperse spherical particulate materi- al [s].
  • 3ISO4402, Hydraulic fluid power-Calibration of liquid auto- matic particle-count instrument- Method using air cleaner fine test dust contaminant [ S ].
  • 4ISO11171, Hydraulic fluid power-Calibration of liquid auto- matic particle counters [ S].
  • 5ISO/TR16386, Impact of changes in ISO fluid power particle counting-Contamination control and filter test standards [ S].
  • 6ISO11943, Hydraulic fluid power-On-line automatic particle- counting systems for liquids-Methods of calibration and vali- dation [ S].
  • 7Determination of particle size distribution-Single particle light interaction methods-Part 3:Light extinctionliquid-borne particle counter. ISO21501-3 .
  • 8.Standard practices for defining size calibration,resolution,and counting accuracy of a liquid-borne particlecounter using near-monodisperse spherical particulate material[].ASTM F.
  • 9.Hydraulic fluid power-Calibration of liquid auto-matic particle-count instrument-Method using air cleaner finetest dust contaminant[].ISO.
  • 10.Hydraulic fluid power-Calibration of liquid au-tomatic particle counters[].ISO.

引证文献2

二级引证文献3

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部