期刊文献+

高含水率染色、固色桦木单板的胶合性能探讨

Bonding Property of Reconstituted Plywood Made from High Moisture Content Veneer
下载PDF
导出
摘要 高含水率染色、固色单板的胶合质量是制造人造薄木的关键技术之一。试验比较、分析了不同含水率条件下,素板、染色、固色单板的胶合强度。结果表明:随着含水率的升高,素板、染色和固色桦木单板胶合强度均呈下降趋势,并且其湿状胶合强度均明显低于各自的干状胶合强度;素板的干湿状胶合强度均明显大于染色和固色单板。 The bonding property of high moisture content dyed veneer and color fastening treated dyed veneer is one of the key parameters for reconstituted plywood manufacturing. The presented work compared and analyzed the bonding strength of the original veneer, dyeing veneer and color fastening treated veneer under different moisture content conditions. The result showed that as the moisture content increasing the bonding strength for all the veneers were decreased. Wet strength of these three kinds of veneers was lower than those of dry strength significantly. Dry strength and wet strength of original veneer were all higher than dyeing veneer and color fastening treated veneer.
出处 《中国人造板》 2008年第10期11-13,共3页 China Wood-Based Panels
基金 "黑龙江省科学技术研究项目"湿固化异氰酸酯胶黏剂制造人造薄木的技术研究(11533017)
关键词 人造薄木 染色 固色 湿固化异氰酸酯胶黏剂 胶合强度 reconstituted veneer dyeing color fastening treatment moisture-curable polymer-isocyanate adhesive bonding strength
  • 相关文献

参考文献1

共引文献9

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部