期刊文献+

比例危险模型及其在产品竞争失效分析中的应用 被引量:2

PHM and Its Application in Reliability Analysis of Competing Failure Modes
下载PDF
导出
摘要 利用比例危险模型分析了突发失效与退化量的关系,给出了竞争失效的一般模型及模型的参数估计方法,利用所给模型对强激光装置所用的金属化膜脉冲电容器进行了可靠性分析. The dependence of catastrophic failure on degradation failure is analyzed by proportional hazard model, and a general model of competing failure and a method of estimatifig parameters are presented. The methodology is demonstrated and validated in the reliability analysis of metallized film pulse capacitors.
出处 《广东工业大学学报》 CAS 2008年第3期36-39,共4页 Journal of Guangdong University of Technology
基金 海军装备改革重点项目(2005-116)
关键词 可靠性 比例危险模型 竞争失效 金属化膜脉冲电容器 reliability proportional hazard model(PHM) competing failure metallized-film pulse capacitor
  • 相关文献

参考文献9

  • 1Yang K, Xue J. Continuous state reliability analysis[ C]// [ s. l. ] : Proc. Annual Reliability and Maintainability Symposium. 1996:251-257.
  • 2Zuo M J, Jiang R, Yan R C M. Approaches for reliability modeling of continuous-state device [ J ]. IEEE Trans On Rel, 1999, 48(1) :9-18.
  • 3Huang W. Reliability analysis considering product performance degradation[ D ]. Arizona: The University of Arizona, 2002.
  • 4Crk V. Reliability assessment from degradation data[ C ]/// [ s. l. ] Proc Annual Reliability and Maintainability Symposium, 2000 : 155-161.
  • 5Oliveira V R B, Colosimo E A. Comparison of methods to estimate the time-to-failure distribution in degradation tests [ J ]. Quality and Reliability Engineering International, 2004, 20:363-373.
  • 6LAWLESS J F.,寿命数据中的统计模型与方法[M].茆诗松,译.北京:中国统计出版社,1998.
  • 7郭大德.金属化膜电容器的损耗分析及损坏机理[J].电力电容器,1995(2):12-15. 被引量:27
  • 8代新,林福昌,李劲,姚宗干.高场强下金属化膜脉冲电容器失效的原因[J].高电压技术,2000,26(5):27-29. 被引量:27
  • 9Ennis J B, Macdougall F W, Cooper R A,et al. Self-Healing pulse capacitors for the national ignition facility (NIF) [C]//IEEE Pulsed Power Conference. Monterey : [ s. n. ], 1999 : 114.

二级参考文献1

共引文献45

同被引文献14

  • 1赵建印,刘芳,孙权,周经伦.基于竞争失效模型的金属化膜脉冲电容器产品可靠性研究[J].系统工程理论与实践,2006,26(1):60-64. 被引量:17
  • 2邓爱民,陈循,张春华.竞争硬故障与软故障失效模式产品的可靠性分析[J].电子产品可靠性与环境试验,2006,24(2):56-60. 被引量:5
  • 3Misra K B.Reliability analysis and prediction. . 1991
  • 4Bocchetti D,Giorgio M,Guida M,et al.A competing risk model for the reliability of cylinder liners in marine diesel en-gines. Reliability Engineering and System Safety . 2009
  • 5Su Chun,Jiang Youhai.Evaluation model for products ex-pected life based on performance degradation amplitude analysis. Proceedings of the8th International Confer-ence on Reliability,Maintainability and Safety . 2009
  • 6Kececioglu D.Reliability Engineering Handbook. . 1991
  • 7Zuo M J,Jiang R Y,Yam R C M.Approaches for reliability modeling of continuous state devices. IEEE Transactions on Reliability . 1999
  • 8Meeker W Q,Escobar L A.Statistical Methods for Reliability Data. . 1998
  • 9YANG K,,XUE J.Continuous state reliability analysis. Proc Annual Reliability and Maintainability Sympo-sium . 1996
  • 10Chhikhara,RS,Folks,JL. The inverse Gaussian distribution: theory, methodology and applications . 1989

引证文献2

二级引证文献4

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部