期刊文献+

Front-end signal analysis of the transverse feedback system for SSRF

Front-end signal analysis of the transverse feedback system for SSRF
下载PDF
导出
摘要 Multi-bunch instabilities degrade beam quality through increased beam emittance,energy spread and even cause beam loss.A feedback system is used to suppress multi-bunch instabilities associated with resistive wall of the beam ducts,cavity-like structures,and trapped ions.A digital TFS (Transverse Feedback System) is in construction at the SSRF (Shanghai Synchrotron Radiation Facility),which is based on the latest generation of FPGA (Field Programmable Gate Array) processor.Before we get such FPGA disital board,investigation and simulation of the front-end were done in the first place.The signal flow was analyzed by SystemView.Construction and optimization of the entire system is our next goal. Multi-bunch instabilities degrade beam quality through increased beam emittance, energy spread and even cause beam loss. A feedback system is used to suppress multi-bunch instabilities associated with resistive wall of the beam ducts, cavity-like structures, and trapped ions. A digital TFS (Transverse Feedback System) is in construction at the SSRF (Shanghai Synchrotron Radiation Facility), which is based on the latest generation of FPGA (Field Programmable Gate Array) processor. Before we get such FPGA digital board, investigation and simulation of the front-end were done in the first place. The signal flow was analyzed by SystemView. Construction and optimization of the entire system is our next goal.
出处 《Nuclear Science and Techniques》 SCIE CAS CSCD 2008年第5期274-277,共4页 核技术(英文)
关键词 同步加速器 前置电路 信号分析 横向反馈系统 TFS, Front end circuits, SystemView, Simulation
  • 相关文献

参考文献8

  • 1Xu H J, Zhao Z T. Nucl Sci Tech, 2008, 19: 1-6.
  • 2Fox J. Feedback Systems for synchrotron light sources. Invited talk at the ESRF Workshop on Mastering Beam Instabilities in Synchrotron Light Sources, Grenoble, France, March 2000.
  • 3Kube G. Sensitivity estimation for the PETRA-III beam position monitors based on a boundary element method. Technical Note, DESY, Hamburg, Germany, January 2007.
  • 4Kube G,Werner M. Signal level calculation for the PETRA Ⅲ beam position monitor system. Proc. of DIPAC, Venice, Italy, 2007.
  • 5Olmos A, Perez E Rehm G, et al. MATLAB code for BPM button geometry computation. Proc. of DIPAC. Venice, Italy, 2007.
  • 6User guide for Systemview[ Z ]. Elanix Corporation, 2003.
  • 7Nakamura T. Transverse bunch by bunch feedback system for the SPring-8 storage ring. Proc. of EPAC, Lucerne, Switzerland, 2004.
  • 8Zhang J J, Qiao C, Liu W Y, et al. J Univ Sci Tech China, 2005, 35:227-231

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部