期刊文献+

高碳过共析钢盘条网状渗碳体检测方法比较 被引量:6

COMPARISON OF DETECTION METHOD OF THE CARBIDE NETWORK IN HIGH CARBON HYPEREUTECTOID STEEL WIRE RODS
下载PDF
导出
摘要 为了准确地检验高碳过共析钢盘条中的网状渗碳体,分别对选用硝酸酒精溶液侵蚀和碱性苦味酸钠水溶液热侵蚀两种显示方法进行了比较。结果表明:采用碱性苦味酸钠水溶液热侵蚀显示的网状渗碳体较清晰,因此认为使用该方法是目前检验高碳过共析钢盘条网状渗碳体的较佳选择。 In order to detect the carbide network in high carbon hypereutectoid steel wire rods accurately, two kinds of detection method of the carbide network are compared. There are corrosion by nitric-acid alcohol solution and hot corrosion by the aqueous solution with alkaline sodium picrate. It is concluded that hot corrosion by the aqueous solution with alkaline sodium picrate is the best method to show the carbide network in high carbon hypereutectoid steel wire rods, because this method can show the most clear-cut carbide network.
出处 《理化检验(物理分册)》 CAS 2008年第10期544-546,584,共4页 Physical Testing and Chemical Analysis(Part A:Physical Testing)
关键词 过共析钢 盘条 网状渗碳体 检测方法 hypereutectoid steel wire rods carbide network detection method
  • 相关文献

参考文献3

  • 1GB/T 18254-2000高碳铬轴承钢[S].
  • 2柯瓦连科 B C,著.金相试剂手册[M].李春志,译.北京:冶金工业出版社,1973.
  • 3Q/(JS)WG02-2004高碳过共析钢热轧盘条中心偏析金相测试方法[S].

共引文献1

同被引文献28

引证文献6

二级引证文献12

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部