期刊文献+

迈克尔逊风场探测干涉仪探测温度不确定度分析(英文) 被引量:3

Analysis on Uncertainty of Temperature for Michelson Interferometer for Temperature and Wind of Atmosphere
下载PDF
导出
摘要 根据迈克尔逊风场探测干涉仪探测原理,所探测的温度不确定度是由装置调制度不确定度和发射线的表观调制度不确定度所决定的.通过它们之间的定量关系,求出了对应于一定温度不确定度的调制度不确定度的允许范围,并进行了模拟计算.最后针对影响因素提出了提高温度不确定度的方法,明显提高了温度测试准确度. According to the measurement principle of Michelson interferometer for temperature and wind of atmosphere, the uncertainty of temperature was determined by the uncertainty in the apparent visibility of the emission line and the instrument visibility. The quantitative relationship between them was deduced and the allowance range of the uncertainty of visibility corresponding to the uncertainty of temperature was gained. The simulation calculation was completed, and the methods to improve the measuring accuracy of temperature were proposed.
出处 《光子学报》 EI CAS CSCD 北大核心 2008年第10期2031-2034,共4页 Acta Photonica Sinica
基金 Supported by the National Science Foundation (40375010,60278019)
关键词 风场探测 温度误差 调制度不确定度 Wind measurement Temperature error Uncertainty of visibility
  • 相关文献

参考文献5

  • 1THUILLIER G, BRUN J F, ALUNNI J M, et al. Frequency stabilized He-Ne laser for WINDII interferometer calibration on board the UARS-NASA satelliteEJ~. @t Eng, 1992, 31(3): 567-572.
  • 2THUILLIER G, HERSE M. Thermally stable field compensated michelson interferometer for measurement of temperature and wind of the planetary atmospheres[J]. App Opt, 1991, 30(10): 1210-1220.
  • 3THUILLIER G, GAULT W, BRUN J F, et cal. In-flight calibration the wind imaging interferometer(WINDII) on board the Upper Atmosphere Research Satellite [J]. App Opt, 1998, 37(8): 1356-1369.
  • 4HERSOM C H. Charicterization of the WINDII instrument for determination of winds, temperatures and emission rates[D]. York: York University, 1993.
  • 5ROCHON Y J. The retrieval of winds, doppler temperatures and emission rates for the WINDII experiment [D]. York: York University, 2000.

同被引文献28

引证文献3

二级引证文献4

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部