期刊文献+

含Nb微合金钢动态再结晶行为研究 被引量:3

Dynamic recrystallization behavior of a Nb-microalloyed steel
下载PDF
导出
摘要 采用Thermecmastor-Z热模拟机,研究Q345E钢的动态再结晶(DRX)行为。结果显示,动态再结晶在高变形温度和低应变速率下更易发生,回归法计算铌微合金钢在950~1100℃温度范围内的变形激活能和应力指数分别为379.29±23.56kJ/mol和5.76。建立了计算动态再结晶峰值应变半经验公式。 Using a Thermecmastor-Z hot simulator, dynamic recrystallization (DRX) behavior of a Nbmicroalloyed steel was investigated. The results show that DRX will more likely occur at higher deformation temperature and lower strain rate. The deformation activation energy and stress exponent for the Nb-microalloyed steel are calculated to be 379. 29 ± 23. 56 kJ/mol and 5. 76 in temperature range of 950 ℃ to 1 100 ℃ by regression analysis, respectively. Furthermore, a semi-empirical model is developed to identify the peak strain for DRX.
出处 《武汉科技大学学报》 CAS 2008年第5期543-546,共4页 Journal of Wuhan University of Science and Technology
关键词 动态再结晶 含铌钢 峰值应变 DRX Nb-microalloyed steel peak train
  • 相关文献

参考文献12

  • 1L N Pussegoda, S Yue, J J Jonas. Laboratory simulation of seamless tube piercing and rolling using dynamic recrystallization schedules [ J ]. Metall Trans, 1996, 21A(1):1 534-1 541.
  • 2A Laasraoui, J J Jonas. Prediction of steel flow stresses at high temperatures and strain rates[J]. Metall Trans, 1991, 22A(7):1 545-1 558.
  • 3S F Medina, J E Mancilla. Static recrystallization modelling of hot deformed steels containing several alloying elements[J]. ISIJ Int, 1996, 36(8):1 070- 1 076.
  • 4J H Beynon, C M Sellars. Modelling rolling microstructure and its effects during multipass hot rolling [J]. ISIJ Int, 1992, 32(3):359-367.
  • 5D Q Bai, S Yue, T Maccagno, et al. Static recrystallization of Nb and Nb-B steels under continuous cooling conditions[J]. ISIJ Int, 1996, 36(8):1 084- 1 093.
  • 6W P Sun, E B Hawbolt. Comparison between static and meta-dynamic recrystallization--an application to the hot rolling of steels[J]. ISIJ Int, 1997, 37 (1) :1 000-1 007.
  • 7许敬文,林均品,王艳丽,林志,陈国良.Ti45Al8Nb2Mn0.2B铸造合金高温形变行为[J].北京科技大学学报,2004,26(5):519-523. 被引量:5
  • 8程晓茹,李虎兴,葛懋琦,陈贻宏,胡衍生,郑琳,罗德信,温阿清,罗刚.管线钢X65高温变形动态再结晶研究[J].金属学报,1997,33(12):1275-1281. 被引量:34
  • 9常大勇,刘雅政,何建中,李扬,刘李斌.含Nb管线钢动态再结晶特性的实验研究[J].轧钢,2005,22(2):12-15. 被引量:16
  • 10J L Uvira, J J Jonas. Compression testing of homogenous materials and composites[J]. Trans Metall Soc AIME, 1968, 242(8):1 619-1 627.

二级参考文献10

  • 1刘振字,王国栋,张强.C-Mn钢板带热连轧生产过程中再结晶行为的模拟计算[J].钢铁研究学报,1995,7(6):27-31. 被引量:6
  • 2程晓茹,第三届国际低合金高强度钢会议论文集,1995年
  • 3毛卫民,金属的再结晶与晶粒长大,1994年,345页
  • 4孙本荣,金属学报,1988年,24卷,103页
  • 5Flemmlng G, Hensger K.Extension of product range and perspectives of CSP technology [J] .MPT International, 2000,(1): 54-63.
  • 6V. Seetharaman,S. L. Semiatin. Influence of temperature transients on the hot workability of a two-phase gamma titanium aluminide alloy[J] 1996,Metallurgical and Materials Transactions A(7):1987~2004
  • 7S. L. Semiatin,V. Seetharaman,V. K. Jain. Microstructure development during conventional and isothermal hot forging of a near-gamma titanium aluminide[J] 1994,Metallurgical and Materials Transactions A(12):2753~2768
  • 8S. L. Semiatin,N. Frey,S. M. El-Soudani,J. D. Bryant. Flow softening and microstructure evolution during hot working of wrought near-gamma titanium aluminides[J] 1992,Metallurgical Transactions A(6):1719~1735
  • 9程晓茹,李虎兴,葛懋琦,陈贻宏,胡衍生,郑琳,罗德信,温阿清,罗刚.管线钢X65高温变形动态再结晶研究[J].金属学报,1997,33(12):1275-1281. 被引量:34
  • 10仲增墉.中国薄板坯连铸连轧技术的现状和发展[J].钢铁,2003,38(7):4-7. 被引量:10

共引文献50

同被引文献35

  • 1刘文昌,郑炀曾.45V钢热变形条件下的动态回复行为[J].金属热处理学报,1993,14(3):28-32. 被引量:3
  • 2马立强,袁向前,刘振宇,张丕军,焦四海,吴迪,王国栋.铌微合金钢动态再结晶的规律[J].钢铁研究学报,2006,18(9):47-50. 被引量:13
  • 3Li G,Maccagno T M,Bai D Q,et al. Effect of initial grain size on the static, recrystallization kinetics of Nb microalloyed steels [J]. ISLI International, 1996,36(12): 1479-1485.
  • 4Fem6ndez A l,I.6pez B,Rodrtguez-lbabe J M. Modeling of partially recrystallized microstructures for a coarse initial Nb microalloyed austenite [J]. Scripta Materialia,2002,46 (11) : 823-828.
  • 5Medina S F,Mancilla J E. Influence of alloying elements insolution on static recrystallization kinetics of hot deformed steels [J]. ISU International, 1996,36(8): 1063-1069.
  • 6Gomez M,Medina S F,Quispe A,et al. Static recrystallization and induced precipitation in a low Nb microalloyed steel [J]. IS[J International, 2002,42(4) : 423-431.
  • 7Sellars C M. Modelling microstructural development during hot rolling [J]. Materials Science and Technology, 1990,6 (11):1072-1081.
  • 8Medina S F,Mancilla J E. Static recrystallization modelling of hot deformed steels containing alloying elements [J]. IS[J International, 1996,36(8) : 1070-1076.
  • 9Hodgson P D,Gibbs R K. A mathematical model to predict the mechanical properties of hot roiled C-Mn and microalloyed steels [J]. IS[J International,1992,32(12): 1329-1338.
  • 10董毅,许云波,肖宝亮,吴迪.含Nb微合金钢动态再结晶行为[J].东北大学学报(自然科学版),2008,29(10):1431-1434. 被引量:11

引证文献3

二级引证文献6

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部