期刊文献+

BiSbCuSn高温无铅软钎料物理性能及润湿性能研究 被引量:1

下载PDF
导出
摘要 研制开发熔点在250~450℃之间的高温无铅软钎料一直是钎焊领域一大难题。熔点为300℃左右的Bi5Sb2Cu钎料因润湿性能和导电性能不良而受到限制。本文通过在Bi5Sb2Cu中添加不同含量Sn形成新型BiSbCuSn四元合金,来改善Bi5Sb2Cu合金的润湿性能和物理性能。结果表明:在Bi5Sb2Cu钎料合金中添加2-↑10wt.%Sn,BiSbCu钎料合金熔点呈下降趋势且幅度较大,但仍在250~450℃之间,润湿性能和导电性能明显改善。当Sn含量为10wt.%时,(Bi5Sb2Cu)10Sn钎料合金润湿性能和导电性能最好。
出处 《现代表面贴装资讯》 2008年第5期50-53,共4页 Modern Surface Mounting Technology Information
  • 相关文献

参考文献6

  • 1Rasad R P. Surface Mount Technology Principle and Practice[M]. New York: Van Nastrangeinheid. 1989
  • 2B.R.Allenby, J.ECiccarclli,I.Artaki etc.An assessment of the use of lead in electronics assembly[J]. Circuit World. 19(2), 1993:1-28
  • 3刘泽光,陈登权,罗锡明,许昆.金锡钎料性能及应用[J].电子与封装,2004,4(2):24-26. 被引量:16
  • 4陈志刚,史耀武,夏志东.微量混合稀土对SnAgCu钎料合金性能的影响[J].电子工艺技术,2003,24(2):53-58. 被引量:29
  • 5C. Lee et al. The 260℃ phase equilibria of the SnSbCu temary system and interfacial reactions at the SnSb/Cu joints[J]. Inter metallics. 2007,15: 1027-1037.
  • 6Xin Ma,Fengjiang Wang,Yiyu Qian,et al. Development of CuSn intermetallic compound at Pbfree solder/Cu joint interface. Materials Letters[J].57(22- 23),2003:3361-3365.

二级参考文献1

  • 1.SMT生产现场使用手册[M].北京电子学会表面安装技术专业委员会,1998.105.

共引文献43

同被引文献37

  • 1周涛,汤姆.鲍勃,马丁.奥德,贾松良.金锡焊料及其在电子器件封装领域中的应用[J].电子与封装,2005,5(8):5-8. 被引量:66
  • 2Gan G S, Chen F, Zeng R C, et al. Formation enthalpy, free-energy and activity coefficients of Sn- Pb eutectic solders[J]. Materials Science Forum, 2009, 610-613:531-536.
  • 3SongJ M, Chuang H v, Wen T X. Thermal and tensile properties of Bi- Ag alloys[J]. Metall Mater Trans A, 2007, 38(A) :1371-1375.
  • 4SongJ M, Chuang H v , Wu Z M. Interfacial reactions be?tween Bi- Ag high-temperature solders and metallic sub?strates[J].Journal of Electronic Materials, 2006, 35(5): 1041-1049.
  • 5Shi Y W, Fang W p, Xia Z D, et al. Investigation of rare earth-doped Bi Ag high-temperature solders[J].Journal of Materials Science: Materials in Electronics, 2010, 21 (9) :875-881.
  • 6Lalena L N, Dean N F, Weiser M W. Experimental in?vestigation of Ge-doped Bi-11Ag as a new Pb-frce solder alloy for power die attachment[J].J Electron Mater, 2002, 31 (11) : 1244-1249.
  • 7Fima P. Gasior W, Sypien A,et al. Wetting of Cu by Bi?Ag based alloys with Sn and Zn additions[J].J Mater Sci, 2010, 45:4339-4344.
  • 8Yamada Y, Takaku Y, Nishibe Y, et al. Pb-free high temperature solders for power device packaging[J]. Mi?croelectron Reliab, 2006, 46(9-11) :1932-1937.
  • 9KimJ H,Jeong S W, Lee H M. Thermodynamics-aided alloy design and evaluation of Pb-Iree solders for high?temperature applications[J]' Materials Transactions, 2002,8(43):1873-1878.
  • 10Chidambaram V, HattelJ, HaldJ. High-temperature lead-free solderalternatives[J]' Microelectron Eng, 2011, 88:981-989.

引证文献1

二级引证文献8

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部