基于UG NX的高速摩托艇设计与数字化制造的集成应用
被引量:1
摘要
该文以UG NX作为开发平台,以某高速摩托艇产品研发过程中涉及的产品逆向工程、装配设计、模具设计、数控加工编程和塑性成型模拟分析等核心关键技术应用研究为对象,简略讲述了UGNX作为CAD/CAM/CAE集成平台的应用过程及其在提高企业新产品开发设计制造效率,为企业创造巨大经济效益中所发挥的作用。
同被引文献17
-
1王言英.船用螺旋桨理论及其应用研究进展[J].大连理工大学学报,2006,46(2):306-312. 被引量:12
-
2WATANABE T,KAWAMURA T. Simulation of steady and unsteady cavitation on a marine propeller using a rans CFD code [ C ]. Fifth International Symposium on Cavitation, 2003 : 1-8.
-
3SIMONSEN C D, et al. RANS simulation of the flow around a ship appended with rudder, ice fins and rotating propeller [ C ]. 11^th Numerical Towing Tank Symposium, September 2008. Brest/France : 53 -58.
-
4张志荣,洪方文.斜流中螺旋桨性能数值分析方法研究[A].船舶力学会议论文集[C],2007,9:139-144.
-
5MUSCARI R, MASCIO A D. Simulation of the viscous flow around a propeller using a dynamic overlapping grid approach[ C ]. First International Symposium on Marine Propulsors smp'09, Trondheim, Norway, June 2009.
-
6ZARBOCK O. Controllable pitch propellers for future warships and mega yachts [ C ]. First International Symposium on Marine Propulsors smp' 09, Trondheim, Norway ,June 2009.
-
7MORGUT M, NOBILE E. Comparison of hexa-structured and hybrid-unstructured meshing approaches for numerical prediction of the flow around propellers [ A ]. First International Symposium on Marine Propulsors, Norway, June 2009.
-
8CARLTON J, RADOSAVLJEVIC D, WHITWORTH S. Rudder-propeller-hull interaction: the results of some recent research, in-service problems and their solutions [ A ]. First International Symposium on Marine Propulsors, Norway ,June 2009.
-
9沈海龙,苏玉民.粘性非均匀伴流场中螺旋桨非定常水动力性能预报研究[A].第十四届中国海洋(岸)工程学术讨论会论文集(上)[c],2009.364-369.
-
10Eren OZSU,Ali Can TAK I NACI, A. Yucel ODABASI. Viscous/potential flow coupling study for podded propulsors[ A]. First International Symposium on Marine Propulsors, Norway ,June 2009.
二级引证文献6
-
1齐慧博,刘业宝,张克正,胡丽芬.毂帽鳍的节能机理分析[J].舰船科学技术,2016,38(7):138-142.
-
2吴湘荣,王永生,蒋超.导管螺旋桨敞水性能数值计算方法研究[J].舰船科学技术,2016,38(6):42-46. 被引量:3
-
3周长科,吴家鸣,王浩天.斜流作用下导管螺旋桨的推力与转矩特性研究[J].中国造船,2020,61(S02):372-382. 被引量:4
-
4胡健,张维鹏.螺旋桨尾流-自由叶轮耦合作用的数值模拟[J].华中科技大学学报(自然科学版),2019,47(10):82-86. 被引量:1
-
5方斌.并行计算在船舶动力系统中的设计[J].舰船科学技术,2016,38(4X):31-33.
-
6孔金平,吴波涛,孔令志.基于CFD的船舶双螺旋桨水动力性能分析[J].舰船科学技术,2019,41(5):37-41. 被引量:4
-
1Winter SPECIALS[J].China International Business,2011(1):62-63.
-
2贺少华,吴新跃.I-DEAS在机构运动动画仿真中的应用[J].机械设计与制造,2006(10):142-143. 被引量:2
-
3平锡鹏.关联线在SolidEdge建模模块中的妙用[J].金属加工(冷加工),2010(14):73-73.
-
4杨君顺,贺雪梅.产品开发中的虚拟现实技术[J].包装工程,2004,25(6):122-123. 被引量:7
-
5覃万云.某摩托艇碳钢紧固件防腐工艺技术研究[J].现代涂料与涂装,2015,18(6):56-60. 被引量:1
-
6潘文鹄.弦外机激冷铸铁凸轮轮的生产实践[J].机械工人(热加工),2006,30(2):63-63.
-
7田凯.试析企业的新产品研发管理[J].中国科技博览,2013(37):68-68.
-
8刘立妍,王茜.虚拟现实技术在产品开发设计中的应用[J].中国包装工业,2013,21(6X):30-30. 被引量:1
-
9吴国君.浅谈发动机缸体柔性生产线构造与运用[J].模具制造,2009,9(11):75-80. 被引量:1
-
10海镜清.刺客传奇-CMB鱼雷快艇战记(上)[J].现代舰船,2009,0(20):43-51.