期刊文献+

纳米莫来石在蓖麻油中的摩擦学行为

Tribological Behavior about Castor Oil with Nano Mullite
下载PDF
导出
摘要 利用MMW-1型立式万能摩擦磨损试验机考察了添加KH-550硅烷偶联剂改性及未改性纳米莫来石对蓖麻油的摩擦学性能的影响。结果表明:KH-550硅烷偶联剂对纳米莫来石具有明显的改性效果;在蓖麻油中添加改性纳米莫来石可以明显提高其润滑性能;改性莫来石的添加量在1%~1.5%时,润滑油的效果最佳。 The effect of nano mullite before and after modified with silane coupling agent on castor oil tribological performance was researched on the MMW-1 universal friction wear testing machine. The result shows that silane coupling agent has good modification effect on nano mullite, the lubricating property of castor oil with modified nano mullite has a visible improvement and the optimum result is got when the content of modified nano mullite is 1% - 1.5%.
出处 《润滑与密封》 CAS CSCD 北大核心 2008年第11期38-40,共3页 Lubrication Engineering
关键词 纳米莫来石 蓖麻油 摩擦学性能 nano mullite castor oil tribological behavior
  • 相关文献

参考文献6

  • 1王朗民.汽车燃料润滑油及其应用[M].北京:人民交通出版社,1994.
  • 2Jackson M. Environmentally compatible lubricants: Focusing on long-term [J]. NLGI Spokesman, 1995, 59 (2) : 16 - 22.
  • 3T 曼格,W 德雷泽尔.润滑剂与润滑[M].北京:化学工业出版社,2003.
  • 4李荡,王群弟.具有生物降解性的二冲程发动机油[J].润滑油,1996,11(5):8-13. 被引量:6
  • 5郭正华,李志刚,黄重九,董湘怀.塑性成形过程摩擦测试的研究进展[J].塑性工程学报,2004,11(3):1-6. 被引量:16
  • 6A Aksay, D M Dabbs, M Sarikaya. Mullite for structural [ J ]. Electronic and Optical Application, 1991, 74 (10) : 2343 - 2358.

二级参考文献31

  • 1康永林,孙英,王先进.用新型摩擦装置测定薄板成形的摩擦系数[J].机械工程学报,1996,32(5):105-109. 被引量:4
  • 2Kunogi M. A new method of cold extrusion. J. Sci.Res. Inst. (Tokyo), 1956, 50:215-246
  • 3Male A T, Cockcroft M G. A method for the determination of the coefficient of friction of metals under condition of bulk plastic deformation, J. Inst Metals,1965, 93:38-46
  • 4Male A T. Variation in friction coefficient of metals during compressive deformation, J, Inst Metals,1966, 94:121-125
  • 5Male A T. Determination coefficient of friction during compressive deformation, Symposium on Experimental Methods in Tribology, 1968:64-67
  • 6Male A T, DePierre V. The validity of mathematical solutions for determining friction from the ring compression test, J. Lubrication Tech, 1970, 92: 389-397
  • 7Male A T, DePierre V, Saul G. The relative validity of concept of coefficient and interface friction shear factor for use in metal deformation studies, ASLE Trans, 1972, 16: 177-184
  • 8S B Petersen, P A F Martins, N Bay. An alternative ring-test geometry for the evaluation of friction under low normal pressure, Journal of Materials Processing Technology, 1998, 79:14-24
  • 9H Sofuoglu, H Gedikli. Determination of friction coefficient encountered in large deformation processes,Tribology International, 2002, (35): 27-34
  • 10S L Wang, J A H Ramaekers. Measurement of friction and material flow-stress by a plane-strain compression tribometer, Journal of Materials Processing Technology, 1996, 57:345-350

共引文献29

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部