摘要
采用十三烷吸收大气中的MA（或MMA），实验表明，该方法处理MA（或MMA）的大气污染是行之有效的。处理的最佳工艺条件为吸收温度20℃，吸收压力0．1MPa，气流速度以低速为宜，当吸收剂十三烷中MA浓度低于8．11％，（若MMA则低于9．00％），排放的尾气中MA（MMA）浓度小于10mg／L。
The test shows that the method of using tridecane to absorb methgl acrylate/methgl methacrylate(MA/MMA)in air is feasibility. The optimal process conditions are that the temperature is 20℃,pressure is 0.1Mpa and gas velocity has better in low velocity. If MA concentration of tridecan is lower than 8.11% (MMA 9.00%),MA/MMA concentration of discharge gas is lower than 10mg/L.
出处
《石油化工环境保护》
1997年第2期41-43,共3页
Environment Protection in Petrochemical Industry
