摘要
以脱皮、低温压榨紫苏油为芯材,利用乳化和喷雾干燥相结合的方法制备紫苏油粉末。确定的最佳制备工艺条件为:壁材大豆分离蛋白与麦芽糖糊精的比例1∶1.2,乳化温度70℃,固形物含量25%,芯材壁材比40∶100;均质压力50 MPa,均质2次;喷雾干燥进风温度168℃,出风温度85℃。该条件下制备的紫苏油粉末微胶囊化效率达95%,表面油含量为1%左右。
Perilla seed oil powder was prepared by emulsification and spray drying from dehulled, low - temperature pressed perilla seed oil. The optimum processing conditions were as follows:soybean protein isolate and mahodextrin was in proportion of 1 : 1.2 as the wall materials, ratio of perilla seed oil to wall materials was 40: 100, the solid content of emulsion was 25%, homogenizing pressure was 50 MPa (homogenizing two times), temperatures of inlet and outlet of spray drying were 168℃ and 85℃ ,respectively. Under the optimum conditions,the embedding efficiency reached 95%, and the surface oil content was about 1%.
出处
《中国油脂》
CAS
CSCD
北大核心
2008年第11期5-8,共4页
China Oils and Fats
关键词
脱皮
低温压榨
紫苏油
乳化
均质
喷雾干燥
dehulling
low - temperature pressing
perilla seed oil
emulsification
homogenization
spray drying