期刊文献+

全熔透GTAW熔池表面变形数值分析精度的改进

Improvement on numerical analysis precision of surface deformation of molten pool in fully-penetrated GTAW
下载PDF
导出
摘要 针对全熔透GTAW熔池表面变形数值模型存在的熔池上、下表面变形耦合作用不确定、重力势能项不完善的问题,做出了相应的改进。以完备的全熔透熔池上、下表面变形方程为基础,基于精度更高的熔池形状数值分析结果,计算和讨论了GTAW焊接不锈钢和低碳钢的焊接过程达到准稳态时熔池上表面和下表面的变形,并对计算结果给予了试验验证。解决了已有文献中熔透熔池表面变形计算值偏小的问题,提高了熔池表面变形的数值分析精度。 The improvement was made to solve the problems existing in present numerical models of fully-penetrated GTAW (gas tungsten arc welding) weld pool surface deformation. Based on the complete and correct equations of both top and back surfaces deformations of molten pool and the more accurately predicted weld pool geometry, the fully-penetrated molten pool surface deformation at the quasi-steady state were numerically calculated and discussed. The calculated results were verified by experiments. The results indicate that this study solves the problems of the lesser predicted molten pool surface deformation in literatures, and improves the numerical analysis precision of molten pool surface deformation.
出处 《焊接学报》 EI CAS CSCD 北大核心 2008年第11期21-24,共4页 Transactions of The China Welding Institution
基金 国家自然科学基金资助项目(50475131)
关键词 表面变形 全熔透熔池 精度改进 数值模拟 surface deformation fully-penetrated molten pool precision improvement numerical simulation
  • 相关文献

参考文献10

  • 1Choo R T C, Szekely J, Westhoff R C. Modeling of high-current arcs with emphasis on free surface phenomena in the weld pool[J]. Welding Journal, 1990, 69(9) :346s - 361s.
  • 2Tsai M C, Kou S. Electromagnetic-force-induced convection in weld pools with a free surface[J]. Welding Journal, 1990, 69(6): 241s - 246s.
  • 3Ohji T, Nishiguchi K. Mathematical modeling of molten pool in arc welding of thin plate[R]. Osaka: Osaka University, 1983.
  • 4Wu C S, Dora L. Prediction of surface depression of a tungsten inert gas weld pool in the full-penetration condition[J]. Journal of Engineering Manufacture, 1995, 209(2) : 221 - 226.
  • 5Cao Z N, Zhang Y M, Kovacevic R. Numerical dynamic analysis of moving GTA weld pool[J]. Journal of Manufacture Science and Engineering, 1998, 120(2): 173-178.
  • 6Fan H G, Tsai H L, Na S J. Heat transfer and fluid flow in a partially or fully penetrated weld pool in gas tungsten arc welding[J]. International Journal of Heat and Mass Transfer, 2001, 44(2): 417 - 428.
  • 7Zhao P C, Wu C S, Zhang Y M. Numerical simulation of the dynamic characteristics of weld pool geometry with step-change of welding parameters [ J ]. Modelling and Simulation in Materials Science and Engineering, 2004, 12(5) : 765 - 780.
  • 8Zhao P C, Wu C S, Zhang Y M. Modelling the transient behaviours of a fully penetrated gas-tungsten arc weld pool with surface deformation[J]. Journal of Engineering Manufacture, 2005, 219(1 ):99- 110.
  • 9Wu C S. Predicting the deformation of both top and bottom surfaces in completely penetrated weld pool[R]. Jinan: Shandong University, 2005.
  • 10赵明,李瑞英.Numerical analysis of dynamic variation of weld pool geometry in fully-penetrated TIG welding[J].China Welding,2008,17(2):47-53. 被引量:6

二级参考文献1

共引文献5

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部